NUDURA BRT10R - ALIGNMENT SYSTEM
1 / 4ページ

NUDURA BRTIOR - MIGNMENT SYSTEM NUDURA Technical Bulletin DURA INTEGRATED BUILDING TECHNOLOGY Building Value.

NUDURA Technical Bulletin BRACE EXTENSION & ANGLE RANGE TURNBUCKLE EXTENSION POSITION VS. WALL HEIGHT DURA INTEGRATED BUILDING TECHNOLOGY Building Value.

NUDURA Technical Bulletin Fastening Requirements Use #10 Pan Head screw to secure the box channel on ICF, maximum spacing 16" (406 mm), torque to allow vertical movement, (supplied by user) Install screws at the top of the slots Fix guardrail members with pan head wood screw #10x1 1/2" (38mm) (supplied by user) Fix toe board to plank with nails or wood screws (supplied by user) Secure each planks with two #10 x 3 1/2" (89 mm) wood screws at each overlap, (supplied by user) Use 3/8" (9.5 mm) x 2 1/2" (63 mm) square quick release to assemble the two bracestogether (supplied by NUDURA). Use...

NUDURA BRTI OR - ALIGNMENT SYSTEM NUDURA Technical Bulletin Picture C; 3 Alignment System kits with scaffold planks and handrail members SCAFFOLDING SPECIFICATION: - Maximum vertical load per scaffold section : 250 LBS (1.1 kN) - The maximum spacing between catwalk brackets is limited to 6 feet (1.83 m) - The NUDURA alignment system is designed to resist wind pressures of up to 50 mph (80 km/h) on an unoccupied scaffold. - All workers must evacuate and all equipment be removed from the scaffolding if the wind speed exceed 31 mph (50 km/h). - Additional support must be provided if wind speed...