カタログ >
LITOKOL >
SpazioLamina EVO Ossidato Ramato

SpazioLamina EVO Ossidato Ramato
1 / 5ページ

カタログの抜粋

SpazioLamina EVO #Ossidato Ramato Wall & Floor THREE-COMPONENT DECORATIVE RESIN FOR FLOORS AND WALLS. SUITABLE FOR OVERLAYING AND UNDERFLOOR HEATING. FOR INTERIORS. PRODUCT WITH VERY LOW VOLATILE ORGANIC COMPOUND EMISSION RATE. SpazioLamina EVO #Ossidato Ramato is a flexible, water-based epoxy decorative system that reproduces the effect of an oxidised copper panel. Obtained from the oxidation of SpazioLamina #Crudo Rame. The Ramato effect is the natural or artificial oxidation of copper, which causes a chiaroscuro, uneven, and natural blend of green/blue colours to emerge. ADVANTAGES / FEATURES • Product with very low volatile organic compound (VOC) emission rate, compliant with class A+ (Émission dans l’air intérieur – French Regulations) • Suitable for installation on heating screeds • Suitable for overlaying on existing flooring • Extended workability of mix (about 40 minutes), which facilitates application on large surfaces • Product exempt from restrictions for road, sea, air and rail transport • Water-based product • Product with excellent fluidity and easy to spread • Easy to sand • Excellent resistance to wear • Real reproduction of oxidised copper effect (green/blue) SpazioLamina #Ossidato Ramato is obtained with the following products: SpazioLamina EVO #Crudo Rame: Bucket part A: 2.00 kg + Can part B: 0.46 kg + Can part C: 1.10 kg = Total 3.56 kg SpazioLamina #Ossidato Ramato activator: 500 ml bottle Neutralizzante EVO: 2 kg can Intended uses Interiors Floors and walls Underfloor heating Overlaying on existing floors and coverings in ceramic, porcelain stoneware, mosaics, agglomerates, natural stones Residential, public, commercial building Covering of furniture and structures in wood, metal or plastic Suitable substrates - Multifondo EVO on: Cement screeds Self-levellers Skim coats Lightweight panels (such as WEDI-SCHLUETER). Separation membrane Underfloor heating systems Concrete Normal and waterproof gypsum Fibre cement slabs (such as Aquapanel) Gypsum and anhydrite Existing floors and coverings in ceramic, porcelain stoneware, mosaics, agglomerates, natural stones and wood Rough cement plaster Wood panels Metal Smoothed

カタログの1ページ目を開く

RESIN DECORATIVE SYSTEM PLANNING The only way to guarantee the long-lasting performance of resin decorative systems is to properly plan the process. It is therefore advisable to consult the national regulations in force in each country, for example standard UNI 10966 for Italy, which defines the planning and installation criteria for resinous systems for interior and exterior horizontal and vertical surfaces. Some of the general precautions that need to be followed are listed below as an example. ANALYSIS OF SUBSTRATE Vapour barrier/retarder Make sure the vapour barrier or retarder has been...

カタログの2ページ目を開く

The three components are pre-batched in their respective packaging. Pour all of component B into the container of component A, and mix until completely homogenised. Delicately pour into the mix the pre-batched powder component C, mixing slowly and incorporating it consistently. Mix, preferably using an electric drill with mixing paddle at low speed (≈ 300/min.) until a consistent mix is obtained without lumps. Hand mixing is not recommended. The three components are pre-batched in their packaging, thus preventing mixing errors. For small surfaces, the components can be partially mixed to...

カタログの3ページ目を開く

SAFETY INFORMATION Consult the product safety data sheet, available on request. PRODUCT FOR PROFESSIONAL USE IDENTIFICATION DATA Appearance Appearance Appearance Customs code Shelf life Component A: white paste Component B: amber liquid Component C: very fine metallic powder 32099000 12 months in original packaging in a dry place. APPLICATION DATA Mix ratio Mix ratio Mix ratio Appearance of mix Specific gravity of mix Pot life Application Component A: 56.2 parts by weight Component B: 12.9 parts by weight Component C: 30.9 parts by weight Thixotropic paste 2.00 kg/dm3 Approx. 40 minutes...

カタログの4ページ目を開く

Powered by TCPDF (www.tcpdf.org) COLOUR CHART Data detection at temperature +23 °C, R.H. 50% and with no wind. May vary depending on the specific conditions of the installation site. The different textures of the Spaziocontinuo® surfaces have different colours, saturation and brightness. For each project, use materials from a single production batch. Materials from different batches may assume slightly different colours. The texture of Spaziocontinuo® is characterised by material discontinuity and natural irregularity, achieved through the skilful artisan work of the installer, thus making...

カタログの5ページ目を開く