カタログ >
LITOKOL >
Prepara Fondo EVO

Prepara Fondo EVO
1 / 3ページ

カタログの抜粋

Prepara Fondo EVO UNIVERSAL ADHESION PROMOTER PRIMER FOR ADHESIVES, SELF-LEVELERS, SKIM COATS AND CEMENT PLASTERS ON SMOOTH AND NON-ABSORBENT SURFACES. SUITABLE FOR OVERLAYING AND UNDERFLOOR HEATING. FOR INTERIORS AND EXTERIORS. READY TO USE. ZHERORISK TECHNOLOGY OFFERS VERY LOW VOLATILE ORGANIC COMPOUND EMISSION RATE. Prepara Fondo EVO is a ready-to-use adhesion promoter primer made from synthetic resins in aqueous dispersion with improved adhesion and water resistance, inert fillers with selected granulometry and specific rheological additives that ensure the product’s fluid application with no dripping in the case of wall applications. ADVANTAGES / FEATURES • Product exhibiths Very low volatile organic compound (VOC). Complies with the most stringent Global Air Quality Regulations. • Versatile product. Can also be used on underfloor heating and over existing ceramic and porcelain tiles • Ready to use • Perfectly adheres to different types of substrates such as: concrete, fiber cement panels, PVC, linoleum, wood, ceramic and porcelain tiles, stoneware, natural stones, surfaces with organic adhesive residue • Easy and quick to install. Dries after 30 minutes. Overlaying possible after 1 hour • Suitable for interior and exterior floor and wall applications, even in severe operating conditions • Product with pseudoplastic rheology, which prevents dripping in the case of wall applications • Reduced consumption • Excellent resistance to humidity • No restrictions for transport over road, sea, air and rail 22lb (5 kg) bags - 1,410.9lb (735 kg) standard pallet of 147 bags 22lb (10 kg) bags - 1,410.9lb (640 kg) standard pallet of 64 bags Prepara Fondo EVO is used to improve the adhesion of adhesives, self-levelers, skim coats and cement plasters on medium absorbency and non-absorbent substrates such as concrete, fiber cement panels, metal, PVC, linoleum, wood, ceramic and porcelain tiles, stoneware and natural stones. The substrates must be clean, solid, compact, crack-free, properly cured and without rising damp. The surfaces on which Prepara Fondo EVO is applied must be free of oil and grease or any other substance that may compromise adhesion. Remove all traces of dirt and properly degrease using specific detergents such as Litoscrub EVO. Any cracks must be repaired with Multifondo EVO, sprinkling the fresh surface with sand or dried quartz with granulometry 0.4-1 mm (0.016 - 0.039in). In any case, the respective technical data sheets must be consulted for correct use of the indicated products. Ready-to-use product without the need for any preparation. In any case, once the container has been opened, we recommend mixing the product briefly, even manually, with a masonry trowel or steel trowel. The product is applied in a single coat directly onto the substrate to be treated using a long pile roller. During application, ensure the product is evenly spread onto the surface. After the drying time (about 1 hours at a temperature of +23°C), the product is completely dry and characterised by a rough surface, which facilitates the application of cementitious products, guaranteeing a high level of adhesion. In the case of complex applications requiring the development of a reinforced and completely uniform covering, the Special Products

カタログの1ページ目を開く

product can be applied using a PVC round-edged trowel (art. 203A0001), embedding the alkali-resistant glass-fiber reinforcing mesh, size 1/12"x1/12" (2x2 mm) - basis weight: 75 g/m2 (2.65oz/yd2) (art. RTRN0050). • Spread the product at temperatures between 40°F and 95°F • Since the product is based on synthetic resins in aqueous dispersion, it must be protected against frost. When packages are transferred and stored in a warehouse, the temperature must not fall below 40 °F (+5°C) so as not to compromise the quality of the product • Do not add lime, cement or other foreign materials to the...

カタログの2ページ目を開く

Powered by TCPDF (www.tcpdf.org) Form n. 537 Revision n. 3 Date: January 2022 The information and provisions contained in this technical data sheet reflect our best experience. Given the impossibility of directly intervening on the conditions of the work site and execution of the works, they represent indications of a general nature, which are in no way binding on our Company. It is therefore advisable to perform a spot test to check the suitability of the product for the intended use. In any case, users must determine whether or not it is suitable for the intended use and shall assume all...

カタログの3ページ目を開く

Prepara Fondo EVO 1 / 3ページ

カタログの抜粋

LITOKOLのすべてのカタログと技術パンフレット

Prepara Fondo EVO
1 / 3ページ