カタログ >
LITOKOL >
FillGood EVO

FillGood EVO
1 / 17ページ

お気に入りに追加する

カタログの抜粋

FillGood EVO READY TO USE & REUSE

カタログの1ページ目を開く

FillGood EVO ready to use & reuse 10 Exclusive Litokol technology 20 The aesthetic values ofFillGood EVO 18

カタログの2ページ目を開く

Zherorisk® is an applied research project of the Litokol R&D division, in collaboration with the University of Modena and Reggio Emilia and third-party research institutes, on raw materials and ways of combining them, aimed at developing an innovative generation of environmentally-friendly building products with “zero risks”.

カタログの3ページ目を開く

Zero risks for operator ✓ iven that most VOC emission occurs during G application, the use of products with ultra-low VOC emission increases the safety of professional users; the lack of pungent and unpleasant odours makes the workplace much more comfortable. ✓ Non-corrosive ✓ Non-toxic ✓ Non-hazardous to the environment Zero risk for the environment ✓ Renewable raw materials ✓ Recyclable materials ✓ Reduced energy consumption ✓ Reduced CO2 emissions ✓ Reduced raw material consumption Émission dans l’air intérieur “Émission dans l’air intérieur” is the label that must be placed on products...

カタログの4ページ目を開く

FillGood EVO ready to use & reuse The grouting industry takes an innovative turn with the exclusive, ready-to-use and reusable polyurethane technology of FillGood EVO, a totally innovative product, the precursor of a new family, a new grouting philosophy characterised by ease of application, savings, visual appeal and above all, the health of operators and air quality of environments. FillGood EVO is the innovative grout based on polyurethane resins in aqueous dispersion for water-repellent grout ceramic and porcelain tiles and glass mosaics with joints between 1 to 6 mm in width....

カタログの6ページ目を開く

Why it’s innovative safe for the installer and the environment ready to use Simple and rational to save time and money. FillGood EVO is a ready-to-use product which does not require any preparation. A+B Ready to use, prevents the emission of powders otherwise typical of cement-based products. Usable in environments with poor ventilation: composed of water-based polyurethane resins, does not contain solvents and hardens through evaporation without releasing any unpleasant odours. FillGood EVO does not contain solvents, irritants or corrosive substances and does not need to be labelled like...

カタログの7ページ目を開く

it looks after your floor WATER REPELLENT The product does not contain cement and thus, is very elastic once hardened, making it suitable for tiling applications subject to vibrations and/or deformation. STABLE AND CONSISTENT COLOURS The product does not contain cement, thus avoiding the formation of efflorescence which is typical of cementitious products. The FillGood EVO binder consists of polyurethane resins in aqueous dispersion which guarantee high stability against light, preventing yellowing or colour variations caused by exposure to UV rays or artificial light sources....

カタログの8ページ目を開く

exclusive lit technology The colours of the product are added by the sintered quartz micro spheres which are coloured on the surface, thus avoiding the release of pigments onto the surface of the tiles or mosaics, making cleaning easier and faster. The product is also particularly effective for the grouting of “wooden effect” ceramics characterised by rough surfaces. STANDARD GRANULOMETRY more uneven and less compact surface that tends to trap dirt more easily SINTERED MICRO SPHERE QUARTZ WITH FINE GRANULOMETRY FINE GRANULOMETRY very smooth and compact surface with a high quality final...

カタログの9ページ目を開く

^^The aesthetic val ues of FillGood EVO Innovative also in terms of the final result, FillGood grouted joints are distinguished by a number of original qualities. The very fine grain, offering the joint a smooth and compact look. Tone on tone grouting, making it practically impossible to distinguish the joints from the tiles, enhancing the effect of surface continuity. This effect is particularly noteworthy in the case of wooden effect tiles or natural stone, thanks to a balanced choice of colours equally divided into cold and warm tones. All the advantages of ready-to-use grouting...

カタログの10ページ目を開く

Fields of application FillGood EVO can be used in the residential and public construction sector to grout joints with widths from 1 to 6 mm, for any type of ceramic and porcelain tiles, including glass mosaics, on indoor walls and floors, and outdoor walls. y residential Walls and floors, even heated, in bathrooms and kitchens. • Floors, even heated, in living rooms, bedrooms, foyers. • Common floors, such as landings and stairways. • Outdoor walls in general • Tiling on substrates subject to vibration or deformation such as metal, wooden or lightweight panels. The product does not contain...

カタログの11ページ目を開く

perfect for grouting large formats As a single-component product whose hardening depends on the evaporation of the water contained in the applied compound, it is perfect for grouting large format ceramic tiles where the tiler only applies the material along the perimeter on the outer edge of the tiles. FillGood EVO grants operators more time for grouting operations, thus preventing wastage.

カタログの12ページ目を開く

perfect colour fusion between surfaces 24

カタログの13ページ目を開く

y colour continuity on timber effect tiles

カタログの14ページ目を開く

Specifications Aspect Dense coloured paste Colours 100 Bianco Assoluto 110 Grigio Perla 125 Grigio Cemento 140 Nero Grafite 205 Travertino 210 Greige 225 Tabacco 230 Cacao Shelf life: 24 months in sealed original packaging at temperatures between +5°C and +35°C inclusive. Avoid freezing. Application data Ready for grouting Floor installation with standard setting adhesive: 24 hours Floor installation with quick setting adhesive: 4-6 hours Floor installation with mortar: 7-10 days Wall installation with standard setting adhesive: 24 hours Wall installation with quick setting adhesive: 4-6...

カタログの15ページ目を開く

You may also be interested in: FillGood EVO is ready to use: mix the paste manually before use. Special finishes: pour the additive onto the paste and mix slowly, using only Spotlight or Gold finishes. The product can be applied at temperatures between +10°C and +30°C inclusive. Apply with a rubber float (Item 946GR) covering areas no larger than 3-4 m2 and in any case, which can be cleaned within 15 minutes at most. For temperatures close to +30°C cover an area of approximately 1m2 and proceed with cleaning immediately. For cleaning, using the specific sponge for FillGood EVO in synthetic...

カタログの16ページ目を開く

FillGood EVO 1 / 17ページ

カタログの抜粋

LITOKOLのすべてのカタログと技術パンフレット

FillGood EVO
1 / 17ページ