ETR
1 / 1ページ

カタログの抜粋

Technical Datasheet - P.V.C Trim Round Edge PVC - ETR Product Description A round edge PVC edging trim - This profile features a small quadrant face which is good for 3 dimensional alignment, overhang lips to better butt against the cushion edge of the ceramic tile and a second upright support to close the face and make it suitable for floor tile use. Dimensions and Colour Available in 6mm, 7mm, 8mm, 10mm and 12mm internal depths and 2.5m lengths. For colours see the PVC colour Chart. Property Vicat Softening Point Tensile Modulus Yield Stress Yield Strain Elongation at Failure Flexural Modulus Tensile Impact Strength Test Method ISO 306 ASTM D638 ASTM D638 ASTM D638 ASTM D638 ISO 178 ISO 8256 Technical Details Installation 1. Check the exact position of the trim required relative to the tiles to be laid. 2. Bed trim intro normal tile adhesive ensuring adhesive penetrates the holes in the flange. There are 5mm holes available for mechanical fixing if additional securing is needed. 3. Spread the adhesive over the flange and firmly bed in tiles butting against the profile. UPVC is particularly suitable for a wide range of application due to its excellent chemical resistance, however note the following: 4. A grout gap is not necessary, however, it a gap is visible ensure grout is compressed firmly into the gap. Not recommended for use above 60°C resistant to most oils, alcohols, petrol and fats. It is unsuitable for use in contact with aromatic and chlorinated hydrocarbons, ketonesm nitrocompounds, esters and cyclic ethers with cause some swelling. Allied Products Maintenance Genesis ETR requires no special maintenance. Cleaned periodically using an neutral detergent to maintain the appearance. ETR has specially designed PVC three way corner pieces, PR, PD and PE, designed to provide a perfect rounded safe edge when mitring the profile. Available in 6mm, 8mm, 10mm, and 12mm depths to suit all profiles. Regular cleaning aids the longevity of the profile and ensures there is no corrosion that could affect safety. P.V.C. Trim • Stair Nosings • Movement Joints • Transitions • Entrance Matting• Edge Protection • Metal Profiles • Tactiles• Tools Litokol spa - via G. Falcone, 13/1 - Rubiera (RE) - Italy Tel.+39.0522.622811- info@litokol.it -

カタログの1ページ目を開く

ETR 1 / 1ページ

カタログの抜粋

LITOKOLのすべてのカタログと技術パンフレット

ETR
1 / 1ページ