Kreon cana
1 / 15ページ

Project kreon headquarters Location Opglabbeek, Belgium Architect kreon / Conix RDBM Architects Photographer Serge Brison kreon cana is a minimal architectural lighting channel that can be equipped with a wide range of kreon LED luminaires. When recessed, kreon cana in white gives depth to ceiling planes whilst kreon cana in black provides a visible separation. When surface or pendant mounted, kreon cana becomes an architectural beam for lighting integration.

Project Cohesion studio Location Turin, Italy Architect Giuseppe Pasquero Photographer Serge Brison

Project Huysewinkel Location Gent, Belgium Architect DIVAA / int. Architect Lievois Photographer Nick Cannaerts

Project Private residence Location Paris, France Architect Numéro A for Art Apart Photographer Serge Brison

Project kreon headquarters Location Opglabbeek, Belgium Architect kreon / Conix RDBM Architects Photographer kreon

kreon cana is a minimal architectural lighting channel that can be equipped with a wide range of LED luminaires. When recessed, kreon cana in white gives depth to ceiling planes whilst kreon cana in black provides a visible separation. When surface or pendant mounted, kreon cana provides an architectural beam for lighting integration. kreon cana is offered in three widths and can accommodate kreon holon circular or kreon prologe square semi-recessed spotlights and kreon holon surface spotlights, in addition to kreon ligna continuous lines of light. The wide choice of luminaires can be mixed...

cana 40 cana 40 profile - surface mounted cana 40 profile - recessed mounted 54 cana 40 profile - pendant mounted cana 40 profile - corner cut Plasterkit for recessed mounting © KR705000 Trimless plasterkit profile @ LxW Lx75 H 115 Suspension kit for pendant mounting © O KR705501 cana 40 corner cut 90°, white KR705502 cana 40 corner cut 90°, black KR705560 Trimless plasterkit corner cut 90° REMARKS O Maximum length of a single run profile: 5900mm. Shipping length depends on transport possibilities. © Profile should be finished with polyester gypsum. Max. thickness boardmaterial: 26mm. ©...

holon 40 single in-cana holon 40 single in-cana Min. module spacing: 100 © KR934002 holon 40 twin in-cana Min. module spacing: 200 © min. spacing 100 (center to center) KR934502 holon 40 directional in-cana Min. module spacing: 100 © Lenses holon 40 directional in-cana holon 40 twin in-cana min. spacing 200 (center to center) CRI CCT Wattage Drive current Fixture lumen REMARKS © The coverplates on the inside of the profile are always black. © The minimum module spacing is the minimum center distance to the next in-cana 40 module. © Use constant current LED driver on remote. One circuit may...

cana 40 prologe 40 single in-cana prologe 40 single in-cana prologe 40 twin in-cana min. spacing 100 (center to center) prologe 40 double in-cana prologe 40 twin in-cana High output Driver KR772024 LED driver, ON/OFF, 2-20W, 2...29V, 700mA prologe 40 double in-cana KR774006 DALI/DMX controller for ligna 40 in-cana © KR774106 1-10V controller for ligna 40 in-cana min. spacing 150 (center to center) CRI CCT Wattage Drive current Fixture lumen REMARKS © The coverplates on the inside of the profile are always black. © The minimum module spacing is the minimum center distance to the next in-cana...

cana 80 profile - recessed mounted Input voltage: 230V, nr. of circuits: 3 Optional accessories Required accessories ■ Required accessories Plasterkit ➋ Trimless plasterkit profile cana 80 corner cut 90°, white cana 80 corner cut 90°, black Trimless plasterkit corner cut 90° ■ Optional accessories Corner cut ➌ cana 80 profile - corner cut REMARKS ➊ Maximum length of a single run profile: 5900mm. Shipping length depends on transport possibilities. ➋ Profile should be finished with polyester gypsum. Max. thickness boardmaterial: 26mm. ➌ No luminaire can be placed in the corner cut. The...

cana 80 holon 80 single in-cana mid/end 450 holon 80 single in-cana mid holon 80 single in-cana end holon 80 twin in-cana mid holon 80 twin in-cana end holon 80 directional in-cana mid holon 80 directional in-cana end Lenses holon 80 single & holon 80 twin in-cana © (for twin, order twice) holon 80 directional in-cana mid/end 450 Lenses holon 80 directional in-cana © CRI CCT Voltage Wattage Fixture lumen REMARKS © The coverplates on the inside of the profile are always black. © Only one optional lens or louvre possible. © Use only in combination with spot optic. The luminaire modules are...

Optional accessories Diffusing lens Lenses ➋ (for twin, order twice) Fixture lumen REMARKS ➊ The coverplates on the inside of the profile are always black. ➋ Only one optional lens or louvre possible. ➌ Use only in combination with spot optic. The luminaire modules are supplied pre-assembled in the profile (all gears incl.). Combinations can be specified on order form. Gear included. IP40 Light sources prologe 80 twin in-cana mid/end prologe 80 twin in-cana end prologe 80 twin in-cana mi

cana 120 cana 120 profile - recessed mounted Input voltage: 230V, nr. of circuits: 3 ■ Required accessories Plasterkit © KR705020 Trimless plasterkit profile 0 LxW Lx180 H 190 ■ Optional accessories Corner cut © KR705521 cana 120 corner cut 90°, white KR705522 cana 120 corner cut 90°, black KR705620 Trimless plasterkit corner cut 90° REMARKS © Maximum length of a single run profile: 5900mm. Shipping length depends on transport possibilities. © Profile should be finished with polyester gypsum. Max. thickness boardmaterial: 26mm. © No luminaire can be placed in the corner cut. The profile is...

holon 120 single in-cana mid holon 120 single in-cana mid holon 120 single in-cana end holon 120 twin in-cana mid holon 120 twin in-cana end Lenses (for twin, order twice) CRI CCT Voltage Wattage Fixture lumen REMARKS © The coverplates on the inside of the profile are always black. © Use only in combination with spot optic. The luminaire modules are supplied pre-assembled in the profile (all gears incl.). Combinations can be specified on order form Gear included. IP40