ANTHEA B38
1 / 16ページ

カタログの抜粋

Retractable awnings with total insertion in the cassette. Lateral supports for the wall and ceiling installation. The Balteus extendable arms are fitted with a joint designed to move them away from the fabric while the awning is being opened. Tilting of the arms up to 75°. Rollerbat fabric roller diameter 70 mm in galvanised steel with patented system for reducing creases in the fabric. Aluminium round front bar prepared for volant fixing or vertical awning terminal. Winch or motorised movement by means of a tubular motor (optional). The maximum dimensions allowed are 450x260. The profiles...

カタログの3ページ目を開く

TECHNICAL INFORMATION Wall installation

カタログの4ページ目を開く

TECHNICAL INFORMATION Wall covering diagram Sporgenza / Projection / Projection / Ausladung / Salida (cm) 0 Altezza / Height / Hauteur / Höhe / Altura (cm) Ceiling covering diagram Sporgenza / Projection / Projection / Ausladung / Salida (cm) 0 Altezza / Height / Hauteur / Höhe / Altura (cm) Minimum awning encumbraces -

カタログの5ページ目を開く

The wind resistance of an exterior shade system is characterized by its ability to support defined loads by simulating wind with positive or negative pressure. In order to define a correlation between the wind resistance class according to the classes defined by the technical standard EN 13561 and the wind speed expressed in Km / h, a comparative table with the Beaufort scale is used. The Beaufort Scale classifies winds according to the speed at which they blow. Wind speed is measured in kilometers per hour (km / h) or in nodes using a measuring instrument, called anemometer, at a height of...

カタログの6ページ目を開く

The KE painting process includes high quality standards, with an 8-stage pre-treatment that includes degreasing, deoxidation, and protective treatments before painting. Thanks to this last phase, components and profiles are further guaranteed against particularly severe environmental situations. At the end of the process the profiles and components are painted with polyester resin-based epoxy powders. Treated components are periodically tested in salt spray according to the ISO 9227 standard to confirm conformity and constistency of the process. The European product standard EN 13561: 2015...

カタログの7ページ目を開く

When working with color, we know that our whole world is defined by light. And color is nothing more than a breakdown of light. Objects reflect back to our eyes only the color that defines it. This is why it is so important to recognize the close link between color and matter. For this project, there are three keywords that guide the research: Words, Places, Matters. WORDS: Naming colors is important to make them familiar and easily recognizable. PLACES: Places define colors. Recognizing different types of places is a starting point for defining and suggesting color combinations. MATERIALS:...

カタログの8ページ目を開く

There is increasing demand for high-performance buildings that have a very low energy consumption and use energy derived from renewable sources. In particular, the limitation of solar heat gain is one of the most important aspects of summer thermal comfort. Solar shading plays an essential role in this concept. The gtot value determines the ability of the solar shield to maintain, in an environment directly exposed to solar radiation, a more comfortable temperature than that which would occur with the presence of glass alone. The solar heat gains are directly proportional to the total...

カタログの9ページ目を開く

Thermal comfort blends perfectly with beautiful style thanks to the more than 500 high performance fabrics available. A wide variety of colors, styles and solar shading factors allow for a system that meets your specific needs. All fabrics are CE Certified according to the EN 13561 and EN 14501 technical standards. N.B. - See the Fabric Guide for further fabric specifications. - SUGGESTED TEMPOTEST STARLIGHT POLYESTER FABRIC. PARÀ UNITI PARÀ RIGHE PARI PARÀ LIFESTYLE UNITI PARÀ LIFESTYLE FANTASIA PARÀ RED PARÀ YELLOW PARÀ BLUE PARÀ BROWN PARÀ GREEN PARÀ FREY SOLTIS PERFORM 92 PRECONTRAINT...

カタログの10ページ目を開く

DICHI AHAZIONE Dl bfl£5Tft?lQNE N. ODGOl-CPR -2Q2A -04-23 W H-rKi df ” ipgnu III 4(1 ft-jjQlamtfW M: * SOyMll dr! g rar u> 1DL L n-od fifjKi dai P^nlisi^nno TWPfcano p(Jt I n 57dflU del 11 'cbtr* o 1014 In’P (-RJ D,t-lllJdtli,Odfl:i > lf-TUlr [HH LrLJ itf-lTdl Nptft c Hd-hUS ■*■ fn\x :an:r KL FKlTLfWMI 50L<JII 5 f l, VI* C»k^j ISQfe, Jwhtma di frm fvt> - Italia SVtHMdiklftilktidflF vwpfcidifaixiffcannd prp\[ of- 4- Spftflf ca;?(ft ipt i .-.uij Dl IHCUtiSlI - Thufe uConM tofniiri''H#fN*ltJ MftyKM H llbrEzu lta?rnfn*ii|» :c(i( u- Vila's fj a "ftr'msrrn a rifi-r:irjci> ^ fi ri.pi’i t"l n...

カタログの11ページ目を開く

KE has adopted a Quality Management System compliant with EN ISO 9001 requirements in order to maintain and increase quality and meet the highest customer expectations. This continuous improvement, through the control of all processes and careful evaluation of risks and opportunities, engages the entire organization in the development of systems to ensure the safety and reliability of the product and in the search for innovative solutions and technologies. KE has activated a Safety Management System as an integral part of its work organization, committing itself to organizing the entire...

カタログの12ページ目を開く

VIRTUAL SHOWROOM BIM technology improves the working method of designers and is now the main source of information for the realisation of a project. With BIM the model is generated in a ''parametric 3D'' from which a series of information such as 2D views, elevations, sections but also metric calculations and much more can be automatically derived. On the KE website you can find the BIM gallery of the main KE models, the certifications and all the useful technical documentation for each product: www.keoutdoordesign.com

カタログの13ページ目を開く

The KE B2B order system is a simple and intuitive service for placing orders conveniently online. An attractive graphic design, numerous functionalities and an easy and intuitive use mode that allows to access in real time to all the information related to the history of the orders and to the processing of the current ones. With the Cad Lite 3D Configurator you can configure Gennius and Bioclimatica models thanks to a constantly updated online catalogue. Thanks to an easy-to-use interface, it also allows you to formulate a complete quote with minimal error.

カタログの14ページ目を開く