カタログ >
JAGA >
Linea Plus

Linea Plus
1 / 1ページ

カタログの抜粋

Comap thermostatic heads silver / remote controlled Jaga thermostatic heads / Jaga Deco thermostatic heads chrome / white with sensor at distance / not / to be fitted. Product dBscriptiDn > Linea Plus Linea Plus Material > Low-H2O heat exchanger is composed of round, seamless circulation tubes made of pure red copper, with pure aluminium fins and two brass collectors for left or right 1/2" same end connection. Air vent 1/8" and drain cock 1/2" are included. Pressure test: 20 bar Working pressure: 10 bar > Brackets: galvanised steel plate thickness 1 mm, dark grey lacquered RAL 7011, with a maximum intermediate distance of 1.05 m > Front panel: galvanised steel plate of 1.25 mm thick > Side panels: galvanised steel plate of 1 mm thick > Top grille: galvanised steel plate of 1 mm thick with small round perforations > The free-standing model: front and back panels are identical, grille and side panels come adapted to this model. The feet are telescopically adjustable for placeͭment on finished floor /concrete floor. Colour > Heat exchanger electrostaticaly lacquered with anthracite grey epoxy-polyester RAL 7024. > The casing is lacquered in the colour white (RAL 9010) / white (RAL 9016) / sandblast grey metallic 001 / other (see colour chart) A scratch resistant epoxy-polyester pow-der, sprayed electrostatically and baked at a temperature of 200 °C. UV-resistant due to ASTM G53. Manufacturer: Jaga, Type: Linea Plus. Output in watts, measured in accordance with EN 442. Options > Towel rail in the same colour as the radia- tor. > Extended air vent for heat exchanger type 10 / 15 / 20. > Brush for easy cleaning of the underside of the heat exchanger. > Calorimeter holder. How to install The building services engineer chooses the heating elements considering the following conditions: > a heat output calculation according to the standard. > Tables of heat outputs and dimensions for Linea Plus elements, according to EN 442 > the normal fitting position for the heating elements is under the window, and to achieve the most aesthetically pleasing appearance the casing should not be wider than the total width of the window. The height of the casing has to be a func-tion of the heat loss calculations; aestheti-cally narrower types are preferable. Types 19, 20 and 21 are more suitable for utility areas. > when only small outputs are required, the casing can be extended, if necessary, to fill up the total window space > the minimum space requirement under the heating elements is: for Linea Plus - 10 cm for types 10 and 11 - 12 cm for types 15 and 16 - 15 cm for types 20 and 21 > as minimum space between the top of the casing and the extended window sills, the above mentioned dimensions have to be applied. > the heat exchangers will be connected to a two pipe system, with a same side end connection. Mini height 8 cm will be con-nected with an other end connection. The heat exchangers are equipped with 1/2" brass collector, 1/8" air vent and a 1/2" drain cock. The flow valve always has to be fitted to the top connection of the heat exchanger. The specially designed ther-mostatic Jaga-Danfoss / Jaga / Jaga type 6 / Jaga-Pro / Jaga-Top valves can be con-nected to plastic central heating service pipes/ RPE/ALU. tube / copper tube/ steel pipe. The valve body is concealed within the standard casing > Jaga thermostatic heads / Jaga Deco thermostatic heads chrome / Jaga Deco thermostatic heads chrome / white / Jaga ILO! THE RADIATOR FACTORY

カタログの1ページ目を開く