カタログ >
HELVAR >
LC1x28-AN

LC1x28-AN
1 / 3ページ

カタログの抜粋

28 W 1-10 V dimmable LED d river • Selectable constant current output: 350 / 500 / 700 mA • 1-10 V control, 1-100 % dimming range • SELV output protection for flexibility in luminaire design • Overload, open and short circuit protection • External NTC thermal protection input • Optional strain relief for independent use (LC1x30-SR) • Long lifetime, up to 100 000 h Note: • Not suitable for load side switching operation. 350 mA / 500 mA / 700 mA ± 5 % < 2* % at s 120 Hz *) Low frequency, LED load: Cree XP-G LEDs 60 V 800mA at startup/switch off Ambient temperature range in independent use Storage temperature range Maximum relative humidity Highest allowable tc point te Life time Mains Characteristics Voltage range Max mains current at full load Frequency THD at full power Tested surge protection Tested fast transient protection Load Output (SELV < 60 V) Output current (Iout) - Accuracy - Ripple Uout (max) (abnormal) Outrush current -20 °C ... +50 °C -20 °C ... +45 °C -40 °C ... +80 °C No condensation ure +75 °C 50 000 h at t = +75 °C c 70 000 h at tc = +70 °C 100 000 h at t = +65 °C c (90 % survival rate) Wire size Wire type Wire insulation Maximum driver to LED wire length Weight IP rating 0.5 mm2 - 1.5 mm2 Solid core and fine-stranded According to EN 60598 5 m Insulation between circuits: Mains circuit - control circuit (1-10V): Basic insulation Control circuit (1-10V) - SELV circuit: Supplementary insulation Mains circuit - SELV circuit: Double/reinforced insulation Note: See page 2 - 3 for dimensions and additional information 1 Helvar | Data is subject to change without notice. More information at www.helvar.com

カタログの1ページ目を開く

in Helvar Load output 700 mA 500 mA 350 mA Quantity of drivers per miniature circuit breaker 16 A Type C Based on I , cont Type-C MCB's with trip characteristics in according to EN 60898 are recommended. Helvar | Data is subject to change without notice. More information at www.helvar.com

カタログの2ページ目を開く

I LC1x28-AN -freeAm in Hyktiny LC1x28-AN LED driver is suited for built-in Luminaire usage. In order to have safe and reliable LED driver operation, the LED luminaires wilt need to comply with the relevant standards and regulations (e.g. IEC/EN 60598-1). The LED luminaire shall be designed to adequately protect the LED driver from dust, moisture and pollution. The luminaire manufacturer is responsible for the correct choice and installation of the LED drivers according to the application and product datasheets. Operating conditions of the LED drivers may never exceed the specifications as...

カタログの3ページ目を開く