MODULO
1 / 10ページ

Formwork for ventilated monolithic foundations www.geoplast.it

FISSURES INSTABILITY CRACKS MOISTURE TRADITIONAL FOUNDATION *WHAT IS RADON Radon is a colourless and extremely volatile gas produced by the decay of uranium U238. Radon gas occurs naturally, and is constantly produced by certain rocks in the Earth’s crust. The main source of Radon gas is the ground: it seeps through the soil and accumulates into rooms and enclosed places. It is very dangerous as it is carcinogenic: its prolonged inhalation is considered the second cause of lung cancer after cigarette smoke; the risk of cancer development is proportional to the exposure to radioactive gas....

MONOLITHIC VENTILATED FOUNDATION MONOLITHIC STRUCTURE SINGLE POUR STABILITY MODULO SYSTEM CREATES MONOLITHIC VENTILATED FOUNDATIONS IN A SINGLE POUR Modulo System, the combination of Modulo and Geoblock, makes it possible to pour the foundation and the groundslab in a single operation, creating a monolithic structure that won’t crack. A ventilated and monolithic foundation grants high stability and load-bearing capacity, signicantly reducing the risks of damage in the case of earthquakes. The soil is a heterogeneous blend of solid elements, water and air. Water is the element naturally most...

DIFFERENT TYPES OF FOUNDATION › TRADITIONAL FOUNDATION LOAD When traditional foundations are made the slab and the ground beams are poured in two operations. The load is not well distributed over the slab, which leads to: › CRACKS › MOISTURE › RADON GAS breaking point MAX stress Radon gas moisture STEEL STRESS reaction subsidence › TRADITIONAL MONOLITHIC FOUNDATION In a monolithic foundation load is evenly distributed and it remains below the admissible limit. Despite this, the contact between the foundation and the soil causes the rising of: Even when load is well distributed, stress...

TECHNICAL DATA LOAD CHART FOR MODULO 50 x 50 View from above of the model View from below of the model Tension state of the MZZ plate, top view MODULO H3 MODULO H6 MODULO H9 MODULO SYSTEM: MODULO + GEOBLOCK GEOBLOCK: IT MAKES THE DIFFERENCE The formwork for monolithic ventilated foundations MODULO creates a monolithic ventilated foundation. Its shape forms a slab on a matrix of small pillars: this solution provides high structural strenght to the building. The sanitary void protects from moisture and dangerous Radon gas. MODULO is available in different heights (from 3 to 70 cm). MODULO...

HOW TO CREATE A VENTILATED FOUNDATION HOW TO CREATE A VENTILATED MONOLITHIC FOUNDATION 1. Prepare a lean concrete base of thickness as required by the load on the foundation. The foundation reinforcement is placed above this lean concrete base; 2. Prepare the perimeter foundation of the pour; 3. Place the ventilation tubes through the ground beam reinforcement for connection between different sections of the ground slab; 4. Place all pipes and services as per design (plumbing, cables, etc.); 5. Place the Modulo forms, without cutting any of the pieces; 6. Use Geoblock to close any gap...

CONSTRUCTION CONTRACT - TECHNICAL SPECIFICATION Construct a sanitary void and the reinforced concrete groundslab above it by pouring concrete onto regenerated polypropylene (*) lost formwork type MODULO®, manfactured by Geoplast S.p.A., Italy; each MODULO® element has a square base of 50x50, 58x58 or 71x71 cm, with the shape of a dome or a series of domes, of height as required by the designer. The top surface of MODULO® is designed to correctly place the welded mesh and to support the pour of concrete min. resistance class Rck 250; the interconnected forms will create a series of domes and...

MODULO System: TECHNOLOGY AT YOUR SERVICE

GEOPLAST S.p.A. rev.001 ST. 06/2010 Via Martiri della Libertà, 6/8 - 35010 Grantorto (PD) - Italia Tel +39 049 9490289 - Fax +39 049 9494028 e-mail: geoplast@geoplast.it - www.geoplast.it