Vanvex RS
1 / 3ページ

Vanvex RS Product description Vanvex RS is a domestic hot water heat pump with an integrated 285 liter hot water boiler, extract air fan, heat pump and electrical connection. This model is delivered with an internal heating cartridge ready to connect e.g. to solar panels, a second heat source. With its modern design and practical pipe connections the Vanvex RS is easy to install, for instance in the basement, in the installations room or in the utility room. With its 285 liter boiler Vanvex RS is able to meet the demand of a family for hot water. Suitability The Vanvex RS is a very energy saving domestic hot water heat pump, which uses the energy of the extract air to heat up the domestic hot water. Data sheet Hot water temperature with heat pump + electric cartridge, max.: 65˚C. The heat pump can produce approx. 367 l of hot water within 11.5 hours at a temperature of 52.5˚C. The capacity is dependent on the extract air temperature, the supply temperature of the cold water and the drawing pattern. It is possible to connect a 1.5 kW electric heating cartridge at peak loads to provide hot water again quickly. When the desired temperature has been reached, the electric cartridge can be switched off. The energy consumption of a Vanvex R is 28 % of the consumption using an electric water heater. 13. Hot water circulation 3/4” RG 14. Hot water connecting 3/4” RG 1 12. Cold water connecting 3/4” RG 17. High pressure switch 07. Back pressure valve SECTION A-A SECTION A-A 662662 SECTION A-A 662 SECTION A-A 662 The heat pump heats the domestic water in a very energy efficient way with an actual efficiency (COP) of 2.72 at a extract air temperature of 7˚C and heating the water from 10°C to 52.5°C and a circulated air volume of 250 m³/h. Hot water temperature with heat pump alone, max.: 55˚C.

Technical data Electrical connection: 1 x 230V+ N + PE, 13 A, 50 Hz Fan RH19V Condenser 2.0 μF Motor AC Isolation class B Protection class IP21 Fan speed 2500 RPM Fan power consumption max. 58 W Fan current consumption 0.26 A Compressor WHP01900BSV Operating temperature range of the heat pump -5˚C to 35˚C extract air temperature Effect collection 0.4 kW at an extract air temperature of 7˚C (water 10˚C-52.5˚C) Heat performance 1.1 kW at an extract air temperature of 7˚C (Water 10˚C-52.5˚C) COP 2.72 acc. to EN 16147 class L Refridgerant R134a Filling 1100 g Power consumption of the electric...

Construction Main dimensions: Ø660 x 1837 mm incl. connecting pieces Cabinet construction: Coloured steel casing with 45 mm insulation Top plate: Cast en bloc with duct connection 2 x Ø160 mm Protection of the boiler: Enamelled inside and magnesium anode. Condenser: D-pipe condenser coiled at the outside of the cylinder. This structure prevents calcification of the condenser Fan capacity Vanvex air volume (m3/h) It is recommend to keep the external pressure loss less than 100 Pa Condensation drain: Ø 19 Weight without /with water: 113 kg/398 kg Construction changes reserved