GES Energy S
1 / 3ページ

GES Energy S is a heat recovery ventilation unit equipped GES Energy S vertical with or without bypass. with a counter flow heat exchanger with a heat recovery rate up to 96 %. The ventilation unit has energy saving supply air and extract air fans with backward curved fan blades and EC motors. GES Energy S horizontal with or without bypass. The unit is delivered with F7 supply air filter and G4 extract air filter and a complete Optima 250 control with a nicely designed user panel. The unit can be demand controlled with the OPT250: • With the humidity control With the week program GES Energy S can be delivered with the following options: - ON/OFF automatic bypass Water duct reheater incl. motor valve Electric duct reheater with variable power levels Electric duct reheater with variable power levels *) *) Recommended by Genvex A/S at outdoor temperatures lower than -3 °C GES Energy S is suitable for dwellings, where a high heat recovery rate and a low energy consumption are requested. GES Energy S can deliver an air volume of up to appr. 250 m3/h at an external pressure of 75 Pa. Due to a high degree of insulation it can be installed outside the climate screen of the dwelling in dry environments down to -10 °C. GES Energy S (vertical) Dimensions in mm. Fresh air Extract air Exhaust air Supply air Counter current heat exchanger Supply air fan Extract air fan Fresh air filter Extract air filter Electrical box Condensate tray Condensate drain/outlet 230V/50Hz Bypass 1: Frisk1: Frisk luft luft 2: Udsugning 4 4 2: Udsugning 3: AfkastAfkast 3: 4: Indblæsning 4: Indblæsning 5: Modstrømsvarmeveksler 5: Modstrømsvarmeveksler 6: Indblæsningsventilator 6: Indblæsningsventilator 7: Udsugningsventilator 2 2 7: Udsugningsventilator Subject to technical modifications of GES Energy S (Small) datasheet 3 3 8: Friskluftfilter 8: Friskluftfilter 9. Udsugningsfilter 9. Udsugningsfilter 10: El-kasse 10: El-kasse

Technical data Control panel Electrical connection 1 x 230 V + N + PE, 10 A, 50 Hz Fans Forward curved fan blades Motor EC motor with integrated electronics Insulation class B Fan protection class IP 44 Fan speed (max. per motor) 1970 rpm Fan power input (max. per motor) 83 W Fan current (max. per motor) 0.68 A Construction Size (l x d x h) excl. connections 1014 x 550 x 550 mm Cabinet Galvanized steel plate 0,7 mm with powder coating Duct connection Ø160 mm Front Made of ABS with insert in EPS and removable filter drawers Wall mounting With Ø8 mm holes for wall mounting Counter current...

The blue line shows the consumption of energy for both fans and control according to Passive House regulations (0.45 W/m³/h = 1620 J/m3). The curves indicate the average external pressure, which is available at a given airflow. The capacity lines are based on an average of the supply and extract air volume in a unit. At a max. air volume the available pressure is 20 Pa higher with G4 (25 mm) than the displayed curves Power consumption For both fans and control. Heat recovery rate ”Dry” heat recovery rate according EN 308 and at the equal air flow on the fresh air and the extract air side....