HCM SERIES_2023
1 / 2ページ

DESCRIPTION The HCM Series can be wall or window mounted. It is designed specifically for exhausting air from domestic and commercial installations such as kitchens, bathrooms, store-rooms and all types of small or confined areas. Typical Applications Exhaust from kitchens, ensuites, bathrooms, store-rooms and other small commercial installations. Suitable for installations where maximum ambient temperature does not exceed 40oC. Optional weather cap is highly recommended for applications where external grille is exposed to direct sun and strong winds. Available in 3 sizes for 230V supply. All models incorporate air operated shutters. Impeller blades are sickle shaped for high performance. Quiet operation. IPX4 rated. Weather Cap optional for protection against harsh external conditions. Suitable for mounting on vertical plain only. For wall mounting, a kit of threaded “wall rods” and sleeves can be supplied as an optional extra. Caters for walls ranging in thickness from 25 to 300mm. Weather and impact resistant plastic housings. Type-squirrel cage, capacitor run. Electricity supply - single-phase 230V, 50Hz. Bearings - sleeve. Class B motor, IPX4 rated. Internal Thermal Protection WT - Wall tube Ref. Section J VZ - Run-on timer Ref. Section M Model Number NOISE DATA Model Number Sound Power Levels LwdB re 1pW 63 125 250 500 The wall/window fans shall be of the HCM Series as supplied by Fantech Pty Ltd and be of the model numbers shown on the schedule/drawings. The squirrel cage motor shall be IPX4 rated. It shall be fitted with air operated shutters. All models shall be fully tested to ISO5801:1997 for air flow and BS848:Part 2, 1985 for noise. ANCILLARY EQUIPMENT WALLRODSPK - Wall rods Ref. Section J TECHNICAL DATA SUGGESTED SPECIFICATION Fuse type Wiring Diagram WP - Wall plate Ref. Section J Select the model that exhausts the closest to your requirements. If the performance required falls between two fans, it is recommended you select Scan the QR code to view more the one handling the information online. most air. WALL, WINDOW & CEILING MOUNTED FANS

Hole diameter Model Number FEATURES Optional external weather cap to suit HCM fans for exposed wall mounted locations to provide additional protection against direct sun, high wind and rain. Features include: - low profile design - available as a separate component - colour matched to suit fan (white) - bird mesh fitted as standard HCM-150CAP - suits HCM-150N fan HCM-180CAP - suits HCM-180N fan HCM - Fan Type Fan Diameter in mm CAP - Weather Cap WALL, WINDOW & CEILING MOUNTED FANS