Accessories for Concrete Structures
1 / 152ページ

Accessories for Concrete Structures

DYWIDAG Threadbar, not weldable

The working loads of all products on this page depend on concrete strength, installation depth, distances between anchors and other factors. Please ask DSI for details. Wobble Anchor Made of MUKUSOL Threadbars For the anchorage of brace frames with a 45° angle On request: made of DYWIDAG Threadbars

The working loads of all products on this page depend on concrete strength, installation depth, distances between anchors and other factors. Please ask DSI for details. Forged, weldable Bunch fits PVC Tubes 22 x 26mm (100239), 32 x 38mm (100283) and 40 x 46mm (100313)

The working loads of all products on this page, except the Weldable Neck Flange, depend on concrete strength, installation depth, distances between anchors and other factors. Please ask DSI for details. Plate Anchor Weldable, application with steel structures, max. working load 90kN Application is shown on page 25.

Unless noted, working loads of Nuts and Couplers are as follows: 012...: 30kN; 015...: 90kN; 020...: 150kN; 026...: 250kN Wing Nut Bracket - Cast Galvanized, for inclined formwork 101913 / 101897: Cast 20 F 1030: Forged 101913 / 101897 for use with steel chords.

Unless noted, working loads of Nuts and Couplers are as follows: 012...: 30kN; 015...: 90kN; 020...: 150kN; 026...: 250kN Combination Plate * Further dimensions available on request

Unless noted, working loads of Nuts and Couplers are as follows: 012...: 30kN; 015...: 90kN; 020...: 150kN; 026...: 250kN Wing Nut - Cast Cast, galvanized 1 Working load of 100309: 200kN 2) Stainless steel, grade 316 (V4A) All Hex Nuts also available galvanized.

Unless noted, working loads of Nuts and Couplers are as follows: 012...: 30kN; 015...: 90kN; 020...: 150kN; 026...: 250kN For screwing and tensioning with two fixed bar ends. 1) Tensile force 40kN if a torque of 0.5kNm is applied 2) Tensile force 70kN if a torque of 0.75kNm is applied 3) Tensile force 100kN if a torque of 1.0kNm is applied

Water Stops prevent water from seeping alongside the Threadbar. Data sheets, installation instructions and test results are available on request. Water Stop Type N Only plate without Threadbar, which has to be ordered separately. ^ Calculation of bar length: Bar length = wall thickness minus double concrete cover of cone Water Stop Type G Cast 1) For tubes with 26mm inner diameter

Bentonite coating which swells when in contact with water and seals up the concrete actively and permanently. On stock for Water Stop Type N On request for Water Stop Type G, Water Stop Type S

Unless noted, working loads of cones for Lost Formties are as follows: 012...: 30kN; 015...: 90kN; 020...: 150kN; 026...: 250kN Steel Cone 1 C = concrete cover, all cones galvanized For de-installation, please use the hexagon wrench .. F 7044 PE Sleeve for Steel Cone For re-locking the cone holes of the Steel-Plastic Cone.

Different systems can be used for anchoring climbing formwork. Two standard systems are presented on the following pages: a) DYWIDAG System b) Arteon System. Upon request, we also develop and manufacture special solutions and individually designed products. Positioning Cone To ensure easy unscrewing of Positioning Cones, the PE-Sleeve is put on the cone before assembly.

Climbing Cone Steel Cone for shear load. To be used with Hex Screws or adapters.

To replace Shear Cones after use.

Special Accessories Shebolt (Anchor Head) Article No. Galvanized. Application is shown on page 24. Weight [kg/pc] Ensures the accurate keeping of a 45° angle for anchoring walls worked fair on one side. Tools Formwork Wrench Hexagonal socket Available with a claw in 36 / 38mm : ref. 102003 / 102004 Wrench with Inversor Cam and Short Socket Hexagonal socket SATECO / HUSSOR

Tools Bent Wrench with Inversor Cam and Short Socket Hexagonal Socket Friction Wrench Hexagonal Socket Socket for Friction Wrench B20 Hexagonal Socket For screwing Vm3.65 and Vm2.40, use a 27mm double socket ref. 100038.

Additional Tools are available on request. Universal Wrench Universal tool with the following features: ■/ Square 18mm, for Positioning Cone 15 F 3073 ■/ Hex size 12mm, for all Nail Plates ...3073/N ■/ Square 13mm, for all Climbing Cones .3038 ■/ Wrench for 15mm DYWIDAG Threadbars Square Wrench Tool for all 0 15, 20 and 26.5mm DYWIDAG Threadbars.

Safety Advice Proper use of Formties and Accessories is essential to prevent accidents and failures. All products are intented for use by qualified and experienced workmen. It is the user’s responsibility to continually inspect working hardware for wear and to discard worn parts. Improper use of the Formtie System can expose workers to extreme danger that may result in severe injury or death.

Application Examples We are the DYWIDAG Formtie System specialist. We manufacture, assemble and supply anchor bars and the complete range of accessories for bar diameters 12.5, 15, 20 and 26.5 mm. All products are designed according to international standards and building codes. Our own in-house testing laboratory and permanent external monitoring guarantee the continuous high quality of our products. Plate Washer 1 Water Stop Type G Wing Nut Bracket 3 Water Stop Type S Combination Plate Steel Plastic Cone Steel Cone Water Stop Type N 6 Steel Concrete Cone Slope Plate Concrete Cover C* 7...

Application Examples Suspensions in rock or concrete with expansion shells Expansion Shell Weldable Neck Flange Steel Structure Plate Anchor Plastic Foot Cones for climbing formworks Flange Screw Cap Feed Cone Wobble Anchor Climbing Cone Subject to technical alterations.

Table of Contents 01. Horizontal Spacers 28 10. General Characteristics of Laroche Concrete Products 65

Pinpoint Plastic Spacers Code CALEPLOT Name Concrete Cover [mm] Highly resistant and very stable plastic spacer. Wide base to ensure ideal fixing of reinforcing steels on insulators, ground floor formwork, Ultra resistant spacer, building site special. Workers can walk on reinforcing steels without any special precautions, Calfix remains in place. Can be clipped on reinforcing steel or at steel intersections in case of welded fabric with small 0 wires. With its well cut legs and stops at the end of these legs, Calfix is invisible after form removal. Spacer with widely cut legs with stops at...