REV
1 / 3ページ

Automations for collective sliding gates IN COMPLIANCE WITH STANDARDS with control board, limit switches and encoder EN IN COMPLIANCE WITH STANDARDS IN COMPLIANCE WITH STANDARDS IN COMPLIANCE WITH STANDARDS IN COMPLIANCE WITH STANDARDS OTHER CHARACTERISTICS - Self locking with limit switches - Speed adjustment and slow down in opening and closing - Motor control by encoder and obstacle detection - Self locking - Magnetic limit switches - Speed adjustment and slow down in opening and closing - Motor control by encoder and obstacle detection - Not self-locking with brake in opening and closing - Limit switches - Oil bath - Speed adjustment and slow down in opening and closing - Motor control by encoder and obstacle detection - Not self-locking with brake in opening and closing - Magnetic limit switches - Oil bath - Speed adjustment and slow down in opening and closing - Motor control by encoder and obstacle detection All models have: foundation plate (to be cemented) included with control board and limit switches EN IN COMPLIANCE WITH STANDARDS IN COMPLIANCE WITH STANDARDS OTHER CHARACTERISTICS - Self locking with limit switches - Speed adjustment and slow down in opening and closing - Anti-crushing safety device - Self locking - Magnetic limit switches - Speed adjustment and slow down in opening and closing - Anti-crushing safety device All models have: foundation plate (to be cemented) included TECHNICAL INFO Motor power supply (V) Maximum power absorption (W) Duty cycle (cycles/hours) for an 8m leaf length N. max. cycles in 24h. for an 8m leaf length Built-in capacitor (μF) Operating temperature (°C) 36 for gates up to 1000kg 31 for gates up to 1400kg 300 for gates up to 1000kg 250 for gates up to 1400kg Motor thermal protection (°C) Speed (m/min) Standard pinion Weight with packing (Kg) Protection level

SLIDING GATES EXAMPLE OF A TYPICAL INSTALLATION Art. REV220 Operator for collective sliding gates Art. PILLY/60 Pair of aluminium columns for photocells, height 55 cm Art. LED230AI Led flashing light 230V with built-in antenna 433MHz Art. 113 Galvanized steel rack 30x12mm with zinc-plated spacers and fixing screws (1m) Art. C-20 Mechanical safety edge 2m Art. 104LUX Pair of adjustable (15°) surface mounted photocells Art. 102LUX Keyswitch with two contacts, surface mounted. Supplied with 2 keys. 2 channels remote control Black version art. TR2N also available (page 132) Warning sign

Nylon rack, with fixing screws (1m) Galvanized steel rack 22x22mm (1m) Art. 113 Galvanized steel rack 30x12mm with zinc-plated spacers and fixing screws (1m) Unlocking device kit for REV (4,5m). To be used in connection with BLINDOS Safety enclosure to place external unlocking device handle Wireless transmitter and receiver kit in 868 MHz, for resistive or mechanical safety edges Resistive safety edge 2m, according to EN12978 Mechanical safety edge 2m Mechanical safety edge 1,6m Safety rubber profile (complete with aluminium base) useful to reduce the impact forces for sliding and swing...