ALU 50
1 / 8ページ

Aluminium rolling towers

ALUMINIUM ROLLING TOWERS ALU 50 ALUMINIUM ROLLING TOWERS The extensive range of ALU 50 aluminium rolling towers enables users perform a broad selection of jobs without needing to assemble scaffold. The main advantages of ALU 50 towers are as follows: • Excellent ratio of weight to performance. Made of 50 mm diameter structural aluminium tube, they provide great stability after assembly and significant load-bearing capacity, all with an extremely light structure. • Simple and fast assembly. The small range of components makes the system easy to understand, without compromising its great...

Made completely of 6061 round 50 mm structural aluminium tube, they are available in two widths: 75 cm and 135 cm. They are fitted with horizontal crossbars every 45 cm, which makes the system extremely adaptable to any height. In addition, the ladder frames have integrated treads to access the different working levels. frames are available in the following heights: • SERIES 075: 1.392 m and 1.856 m • SERIES 135: 1.392 m, 1.856 m and 2.32 m Consisting of a coupling spigot with hole for a locking pin made of galvanized steel. Frame 750 x 1392 (AL) LADDER Frame 750 x 1392 (AL) Frame 750 x...

m ALUMINIUM ROLLING TOWERS j HORIZONTALS AND DIAGONAL BRACES Made of 6061 round 50 mm structural aluminium tube, they have a connector fitted with a quick trigger that enables instant connection between the frame crossbars and guardrails. The colour of the triggers also enables them to be identified easily. Frame made of 6061 structural aluminium, with a riveted, damp-proof, anti-slip board surface. The plank with a hatch has a safety latch and a maximum opening angle of 85°, which prevents the gap being left open accidentally. Designed to complete the side protection formed by the...

ALU 50 ASSEMBLY PROCEDURE - ALU 50 (075 SERIES) (MODEL 7504) Put two adjustable casters into position inside a frame. Lock the wheels by pressing down the braking device to prevent it moving and rotating. Attach two horizontal handrails on top of the bottom crossbar of the frame. The horizontal handrails can be identified by the green locking latch. Attach the other free ends of the horizontal handrails to the other frame, which should be fitted with a ladder. This frame will previously have been fitted with casters. Assemble the diagonal braces from the bottom crossbars to the top...

ALUMINIUM ROLLING TOWERS • Maximum work height: 6.23 m (for greater heights, please consult our Technical Department). • Working surface area: 0.75 x 2 m = 1.5 m2(option 0,75 x 3 m = 2,25 m2)* • Working load: 2kN /m2 (Class 3) , EN 1004:2006. • Instruction manual in compliance with EN 1298:1996. • Stabilization using fixed stabilisers. (*) Heights with the caster spindle fully extended and, in brackets, the height with the caster spindle fully retracted. * pOSSIBILITY Of 3 METRES LENGTH.

Maximum work height: 9.94 m (for greater heights, please consult our Technical Department). Working surface area: 1.35 x 2 m = 2.7 m2(option 1,35 x 3 m = 4,05 m2)* Working load: 2kN /m2 (Class 3) , EN 1004:2006. Instruction manual in compliance with EN 1298:1996. Stabilization using fixed or adjustable stabilisers. ■ j * pOSSIBILITY Of 3 METRES LENGTH.

Ctra. Santa Bárbara - La Sénia, km 4,6 Tarragona - SPAIN Modular scaffold MEKA 48 Aluminium rolling tower ALU 50 Sectional scaffold SECUS Rolling tower SYS-FAST Ladder frame scaffold Rolling tower MEKA 48 European frame scaffold DINO 48 Multipurpose tower European frame scaffold FREE 48 Stages, ramps & grandstands. Access towers Product manufacturer: DACAME S.L. Product design: DACAME S.L. Graphic design: DACAME S.L. The content of this catalogue is fully protected by copyright and the total or partial reproduction of images, texts, illustrations and graphics without the express consent of...