カタログの抜粋
CBG Grid laminate Style TDS-No. 3500 The grid laminate Style is a glass fibre epoxy laminate with an open grid structure. In combination with other RTM (resin transfer moulding) components, material can be saved, costs reduced and component quality increased. Application example: reinforcement for production of wind power plants, concrete reinforcement, bridge and road construction. ✓ corrosion resistant ✓ antibacterial Delivery ✓ Delivered as sheet products wrapped in film ✓ Various thickness, sizes, surfaces and colours are available on request Processing and storage ✓ The usual protective measures must be taken during processing. Gloves and safety glasses are recommended. ✓ Storage horizontal, e.g. on pallets, on level surface, secure against slipping The technical information on our products reflects the state of our knowledge at the time of printing. Therefore, the latest edition of the data sheet should always be used, as our experience and knowledge are constantly evolving. In case of doubt please contact us. The application shown is only exemplary and may vary in individual cases. It is therefore not relevant for liability. Our general terms and conditions apply, which can also be found on our homepage.
カタログの1ページ目を開くCBG Compositesのすべてのカタログと技術パンフレット
-
CBG SeaPan WP 25/G2 ページ
-
SeaPan WP 501 ページ
-
CBG SilencePan 25/G1 ページ
-
SeaPan WP 30/601 ページ
-
SeaPan FF 30/601 ページ
-
CBG BCR Rebar1 ページ
-
CBG BCR Grid1 ページ
-
CBG Basalt Roving1 ページ
カタログアーカイブ
-
CBG-Basalt fabric1 ページ
-
CBG PgGE1 ページ
-
CBG PgBE1 ページ
