RESITRIX® Pipe Sleeve (35-100 mm)
1 / 2ページ

{{requestButtons}}

カタログの抜粋

RESITRIX® Pipe Sleeve (35-100 mm) - 1

Pipe sleeve (35-100 mm) EPDM SHAPED PARTS FOR SEALING CIRCULAR ROOF PENETRATIONS EPDM shaped part for slipping over and sealing in roof penetrations with a round cross-section and diameters of 35 to 100 mm. The connecting collar consists of a circular piece of RESITRIX® SK W Full Bond with a diameter of 50 cm. APPLICATIONS • ll RESITRIX® seals without primer A • iquid-applied plastic systems that do not L contain softeners using FG 35 surface primer • f your application is not stated, please I contact our Technical Department RESITRIX® Product catalogue

カタログの1ページ目を開く
RESITRIX® Pipe Sleeve (35-100 mm) - 2

work preparation The surfaces to be bonded must be dry, clean and free from dust and grease. installation The connection collar is tightly bonded with the roof sealing using hot-air welding only. The weld width is at least 4 cm. Before the sleeve can be slipped on the roof penetration, the upper side must be cut or reduced to fit correctly. The correct cutting point is determined as follows: First turn the pipe sleeve and then place it in the penetration. Mark the point at which the sleeve stops flush with the roof penetration. The cutting point is 2 cm above this mark. In the case of...

カタログの2ページ目を開く

CARLISLE Construction Materials GmbHのすべてのカタログと技術パンフレット

  1. CARLISLE® Architect

    25 ページ

  2. Alturix

    2 ページ

  3. ROOFING SYSTEM

    28 ページ

  4. RESITRIX® FG40

    2 ページ

  5. RESITRIX® FG35

    2 ページ

  6. RESITRIX® SK

    2 ページ

  7. RESITRIX® MB

    2 ページ

  8. RESITRIX® CL

    2 ページ

  9. RESITRIX® SKW

    2 ページ

カタログアーカイブ

  1. RESITRIX-SR

    2 ページ

  2. RESITRIX-CL

    2 ページ

  3. ALUTRIX

    2 ページ