BUSBAR SYSTEM
1 / 166ページ

BUSBAR SYSTEM SOLUTIONS FOR THE ELECTRICAL DISTRIBUTION BUSBAR SYSTEM In accordance with its policy of continuous improvement, the Company reserves the right to change specifications and designs without notice. All illustrations, descriptions, dimensions and weights in this catalogue are for guidance and cannot be held binding on the Company. GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES

LB PLUS BUSBAR FROM 25, 40 TO 63 A Light and Power. The solution that comes from above page 12 LB PLUS DATA BUSBAR FROM 25, 40 TO 63 A The new busbar trunking system for LIGHTING MANAGEMENT page 26 MINISBARRE (MS) BUSBAR FROM 63, 100 AND 160 A The compact solution for medium power distribution page 32

MEDIUM RATING (MR) BUSBAR FROM 160 TO 1000 A Performance and functionality in medium power page 42 TROLLEY SYSTEM (TS-MTS) BUSBAR FROM 63 TO 250 A Every time when the power required is on the move page 74 SUPER COMPACT (SCP) BUSBAR FROM 630 TO 6300 A The power solutions for industrial and service sector applications page 86

The busbar is the most modern solution for the distribution of energy in an installation for machinery, equipment and lighting fittings, in all types of buildings such as warehouses, trade fairs. The busbar is also frequently used to power the (horizontal and vertical) backbones of buildings used for the commercial-service sectors, thus observing the time required for the installation and providing a final solution with remarkable technical advantages. Legrand’s busbars, available in 3 segmented ranges (Low Power, Medium Power and High Power), are able to meet all installation requirements,...

Easy The electric design of the busbars is achieved in compliance with the product Standards. The rated current of our busbars is guaranteed at a room average temperature of 40 °C (n.d.r. the Standard requires 35°C). After choosing the busbar which is able to meet the operating current regulations, it will be very easy to verify the voltage drop as well as the protection against overcurrents by using the technical tables available for all our production lines. In particular, these tables define a wide range of technical data which allow the planning engineer to carry out calculations with...

ADVANTAGE Flexibility By using the outlet windows located on the straight elements, the busbars provide high management flexibility, both when planning (electrical engineer) and when installing the system (installer); they are also used for the unavoidable changes required by the electric system to adapt to the varied needs of the end user during the life of plant. The junction boxes can be inserted and removed from their outlets when the busbar is electrically powered and inserted in another plug outlet, thus avoiding downtime. Example of lighting and small power distribution The...

Quick installation The busbar’s junction and fixing systems have been designed and created to install busbars easily. In a cable and tray system, the time required to install only the tray is the same used to install a complete system in busbars. Furthermore, given the same capacity, a power busbar, which generally has aluminium conductors, is much lighter than a system made with (copper) cables: lighter weights require a lower number of supporting frames or, in any case, more simple and inexpensive supporting frames. That is why the installation time of a busbar is obviously shorter than a...

Company approval CERTIFICATIONS The quality management system Legrand has always considered Quality one of the strategic points of its policy, and therefore implements a strict Quality Management System. The efficacy of the procedures devised and the level of organisation required for their implementation, have enabled the company to obtain the approval certification of its Quality Management System in accordance with the latest edition of the UNI EN ISO 9001 standard. All company processes, from Marketing to Product Development, Manufacturing, Sale, and Technical Support, contribute to...

0 legrand Mark certifications and approvals Once compliance with IEC 61439-6 product standard has been confirmed, the various product lines may be further marked and approved for special applications. The compliance of a product to the specific standards can be certified by the manufacturer declaration and the application of the "CE" symbol, or through the concession of a mark by an appointed third party body that ascertains its compliance. In the case of manufacturer declaration, the responsibility for compliance with the standards lies with the manufacturer itself; If a quality mark is...

The CERTIFICATES The Super-Compact tine has been given Type- Approval Certifications by the most prestigious Electro-technical agencies: Certificate of Compliance with Standard: 61439-6 (ACAE - LOVAG) EAC Type-Approval (Russia) In order to obtain these recognitions, the SCP range has undergone the following type tests, as confirmation of their quality: EI 120 fire resistance with Fire Barrier IEC 60331-1 / CEI EN 50362 - Fire Resisting Test BUSBARS TRUNKING SYSTEM HV/LV CAST RESIN TRANSFORMERS

Group synergy allows for immediate integration between Thanks to a reinforcement kit it is possible to quickly and easily busbar trunking systems, cast resin transformers and Legrand install any kind of board connection to the roof of the cabinet. XL³ cabinets. The safety and the performance of the Legrand system are Cast resin transformers can be made to order with a preguaranteed by the system approval certification, obtained installed interface connection for the busbar trunking systems. following stringent tests carried out in the most important international labs. The cabinets XL3 can...

BUSBAR FROM 25, 40 TO 63 ALight and Power. The solution that comes from above LBplus is the range of busbars for the distribution of energy and lighting from 25 to 63 A. With LBplus, it is possible to have busbars with 10. 16, and 25 A Plugs, with a reduction of the codes of the range, increasing functionality, thanks to accessories suitable for all the versions. With LBplus the line becomes extremely flexible, with the possible to adapt the system to any development. LBplus has been conceived for the distribution of energy and lighting, all in one product. The main features are: 2 PRODUCT...