Staifix-Thor Helical Crack Stitching Kit
1 / 4ページ

{{requestButtons}}

カタログの抜粋

Staifix-Thor Helical Crack Stitching Kit - 1

Staifix-Thor Helical Crack Stitching Kit The high strength, non-disruptive solution for the permanent repair of cracked masonry Stainless Steel Helical Bar (10 bars x 1000mm long) Cementitious Grout (3 litres) the Ideal for st or that speciali remedial repair job single Grout Applicator Gun with Flat Nozzle Paddle for Grout Mixing Finger Trowel Purchase of this kit guarantees the correct specification of reinforcing bar, grout and installation tools required for crack stitching and the compatibility of all components.

カタログの1ページ目を開く
Staifix-Thor Helical Crack Stitching Kit - 2

The High Strength, Non-Disruptive Repair Solution This kit contains all the necessary components to permanently repair vertical or stepped cracks in masonry. Experts in the remedial market have designed the kit’s contents, guaranteeing the correct specification of reinforcing bar, grout and installation tools required for this application and the compatibility of all components. Stainless steel helical bars are chemically bonded into horizontal slots, cut in bed joints, which stitch across the crack. When installed, these bars evenly redistribute tensile forces over the reinforced area to...

カタログの2ページ目を開く
Staifix-Thor Helical Crack Stitching Kit - 3

Important It is essential that the cause of the cracking is established by a structural engineer and then eliminated, prior to the installation of this system. 1. Cut a slot in the mortar joint to the specified depth that extends just over 500mm each side of the crack (recommended equipment: Twin-bladed diamond-tipped wall chaser). Ensure the mortar is completely removed to reveal the top and bottom faces of the masonry. Prepare surface for grout. See ‘Surface Preparation’ section below. 2. Connect the paddle to a power drill, blend the components of the grout together in the tub and load...

カタログの3ページ目を開く
Staifix-Thor Helical Crack Stitching Kit - 4

Ancon will advise on the correct selection of fixing to suit any project and provide details of your nearest stockist. Tel: 01 14 238 1 238 International Tel: +44 114 238 1 238 Visit: www.ancon.co.uk The construction applications and details provided in this literature are indicative only. In every case, project working details should be entrusted to appropriately qualified and experienced persons. Whilst every care has been exercised in the preparation of this document to ensure that any advice, recommendations or information is accurate, no liability or responsibility of any kind is...

カタログの4ページ目を開く

Ancon Building Productsのすべてのカタログと技術パンフレット

  1. Eazistrip

    16 ページ

  2. Restraint System

    4 ページ

  3. Gauge Tape

    2 ページ

  4. Refractory Fixings

    8 ページ

  5. Staifix Wall Ties

    2 ページ

  6. Special Fabrications

    12 ページ

  7. KSN Anchors

    24 ページ

  8. Lockable Dowels

    12 ページ

  9. Corner Guards

    2 ページ

  10. Hidden Strength

    7 ページ

カタログアーカイブ