Ancon Guide: CE Marking to the CPR
1 / 12ページ

At Ancon, it’s all part of the service

CE Marking to the CPR: What does it all mean?

What do we mean by CE Marking? CE marking is a method of identifying those products that comply with a harmonised European Standard or have a European Technical Approval. With effect from 1st July 2013, under the new Construction Products Regulation (CPR), virtually all construction products must carry the CE mark before they can legally be sold in Europe. There are various exceptions. Many new or innovative products, for instance, fall outside the scope of current European Standards/Technical Approvals and therefore cannot be CE marked. Where it is applied, CE marking will make it easy for...

How does CE Marking work? CE marking is not new – it is already compulsory for a wide range of everyday products – for instance, toys, machinery and electrical items. Under the Construction Products Regulation, it will become mandatory to apply the mark to all construction products covered by harmonised European Standards, with effect from 1st July 2013. To qualify for a CE mark, manufacturers must undertake several tasks. These are specific to each product type and are given in the Standard. Tasks include: • Testing of each product type • Ensuring the necessary factory production controls...

Ancon products that carry the CE mark Ancon Product(s) Relevant European Standard/Approval • Masonry supports systems • Steel balcony connectors • Other fabricated Designs to EN 1993 (Eurocode 3). Inspection of factory production controls by an approved body including welding certification* • Cavity wall ties • Frame cramps • Movement ties • Head restraints • Channel ties • Stone fixings Extensive independent product testing. Extensive independent product testing. reinforcements AMR, AMR-X and AMR-CJ Extensive independent product testing. Product testing and audited production controls....

What Ancon has done to ensure CE Marking compliance As a leading manufacturer of steel construction products, with established sales throughout Europe, Ancon has been working with CE Marking legislation for many years. In fact, it has been mandatory in many of our key European markets for some time. To prepare for its adoption in the UK and Ireland, where we sell a slightly different portfolio of products, we have successfully carried out extensive independent product testing, passed external audits of our manufacturing facilities, published the necessary collection of Declarations (DoP’s)...

Declaration of Performance Declaration Number: A0017-00-EN ANCON hereby declares that the product range identified as, conforms to the provisions of, ZA Annex, EN 845-1: 2003 +A1: 2008 Symmetrical Wall Tie covered in clause 1 of the standard Intended Use: Type 1 wall tie for connecting two leaves of a cavity ANCON hereby declares that the product range identified as, 76-100mm cavities. wall. Suitable for IHR-B/ IHR-V/ IHR-S Notified Body: CERAM Research Limited Queens Road, Penkhull STOKE-ON-TRENT ST4 7LQ United Kingdom Tel: +44 (0)1782 764444 conforms to the provisions of, ZA Annex, EN...

Your CE Marking questions answered Q: I am a distributor, will CE Marking affect me? A: From 1st July 2013 you will need to be sure that all of the construction products you sell meet the requirements of the CPR and carry the CE mark where appropriate. You will also need to ensure products are accompanied by the correct documentation and that relevant additional information is supplied when requested. Ancon distributors can be confident that all of our products meet the CPR requirements and are CE marked where appropriate. You can download any Declaration of Performance (DoP) and other...

Q: I am an engineer, do I need to make any changes to how I specify products? A: Product specifications should be amended to include CE marked items only, where the product is covered by a harmonised European Standard e.g. masonry support systems, windposts, wall ties and bed joint reinforcement. A list of harmonised standards is available from NANDO – http://ec.europa.eu/enterprise/newapproach/nando/ By specifying Ancon, engineers are guaranteed CE marked products, backed by Eurocode designs. Ancon provides technical advice and specification assistance. Q: What about Ancon products that...

Ancon products excluded from CE Marking legislation These products are outside the scope of CE marking, however most carry a voluntary mark from a recognised third party to provide assurance of product testing and/or manufacturing controls. Punching Shear Reinforcement – Shearfix Reinforcing Bar Couplers – MBT/TT/Bartec Reinforcement Continuity Systems – Eazistrip/KSN Balcony Connectors – Isolan Shear Load Connectors – DSD/HLD/Lockable Dowel Wall Starters – Universal/Quickstart Wall Ties – TeploTie CERAM Cast-in Channels with Crimped Anchor Pairs Warm Roof Helical Fixings

BUILDING PRODUCTS Ancon Building Products President Park Email: info@ancon.co.uk