The rear part of the luminaire is placed in a hole made by a standard commercially available circular cutter and then screw fastened after inserting the lead. The connector assembly sup- plied is used to connect the luminaire to the SELV supply and the upper part is mounted on the lower part of the lumi- naire by rotating it 30°. This luminaire can be uninstalled without fuss, e.g. in order to resand parquet flooring. When wall mounted, the lumi-naire is secured to the flush- mounting box in the cut-out in the wood panel or plasterboard by means of two plastic brackets. Electrical installation is obtained using 5 m or 10 m long feed lines that are available as acces- sories. The ends of the lines are connected at the luminaire end by a connector assembly. They are connected in a star configu- ration on the secondary side of the power unit. The feed line is laid underneath the parquet flooring on the underlay.

Scratchproof polycarbonate inner part makes it possible to insert transparent foil printed on one’s own PC.