Text version of the page 
Text version of the page 
LIGHTTOOLS LIGHTTOOLS lighting inserts are characterised by their clear
design and by the fact that they
are child's play to handle: they
can be fitted into the channel
sections at any point and be
locked into them at any level
with the aid of two key switches,
mounted at the ends without the
use of tools. They can be moved
freely over the entire length of
the channel run without any
restriction. L-TOOLS channel cover section Cat. no. kg Order no. Channel cover section Cover section • For optional closure of channel sec-tion opening (for flush with ceiling/
ceiling-bearing) by customer• Material:extruded aluminium section
• Colour:titanium• Incl.clamping springs enclosed forpush-on• If required,to be cut on site accordingto local requirements,and to besnapped flush into channel sectionopening 1,600 mm 1.1 60 210 013 Do not arrange above lighting heads. L-TOOLS HIT-CRI G8.5 lighting insert c Cat. no. L/W/Hkg Order no. Lighting module with rotating andpivoting reflector head • Reflector head made of die-castaluminium• Rotates through approx.220°,pivotsthrough approx.70°• Specular reflector made of anodisedhighest-grade aluminium,silver
colour,incl.protective glass panel• Protective glass panel in front ring canbe replaced by colour/blocking filter• Housing made of sheet steel
• Colour:titanium
• Special key switches at the ends forfitting without tools• Lighting inserts can be positionedvariably in the channel,both longitu-
dinally and vertically• With electronic ballast (non-dimmable)• Mains voltage:220–240 V/50/60 Hz• 3 x 1.5 mm Spot lighting insert (1x module) electronic 1/20 W HIT-CRI G8,5 flood 315/95/511.7 60 210 029 1/20 W HIT-CRI G8,5 spot 315/95/511.7 60 210 028 1/35 W HIT-CRI G8,5 flood 315/95/511.7 60 210 031 1/35 W HIT-CRI G8,5 spot 315/95/511.7 60 210 030 1/70 W HIT-CRI G8,5 flood 315/95/511.7 60 210 033 1/70 W HIT-CRI G8,5 spot 315/95/511.7 60 210 032 0,6m HIT CRI G8,5 2 connecting cable,includ-ing 5-pole plug-in contact with phase
selection (3 phases) To specify e.g.:L-TOOLS channel cover section 1,600 mm 60 210 013
|