LIGHTTOOLS

L-TOOLS through-wiring with sockets L-TOOLS feed-in/feed-out unit for through-wiring

Cat. no. kg Order no.

Throug-wiring

7 x 1.5 mm

2

through-wiring

• 5 x 1.5 mm

2

für 3-circuit mains supply• 2 x 1.5 mm

Section with total length of approx. 1.6 m 0.4 60 210 010 Loom with total length of approx. 10 m 2.0 60 210 009
2

for bus supply• Incl.7-pole plug-in sockets every 320 mm• Fitted in channel section without useof tools• Through-wiring has to be cut tolength on site

Loom with total length of approx. 25 m 5.0 60 210 008

One additional feed-in/feed-out unit (also as closure) required per end of cut.

Cat. no.Order no.

Feed-in/feed-out unit for through-wiring • Connected on site to ends of through-wiring• For terminating continuous throughwiring or for safe closure of cable end• Plug-in contacts with push-buttonrelease• Feeder cable inserted through ope-ning in end-plate

Feed-in/feed-out units (pair)

7-pole 60 210 011

L-TOOLS cover for through-wiring

Cat. no. kg Order no.

Cover section for through-wiring

Cover section

• For optional closure of through-wiringon site• Material:grey plastic (titanium colour) • Can be cut to size as required on siteand snapped into the supporting finsin the base of the channel section

1,600 mm 0.4 60 210 012

L-TOOLS steel cord (pair)

Cat. no.Order no.

Pair of steel cords • For continuous height adjustment andbalancing of channel lengths• For reducing load on suspended ceil-ing,and for directly shifting weight to load-bearing ceiling structure• Load carrying capacity per steel cord:30 kg• Insert into both spacing brackets ofmounting frames,or snap onto moun- ting tracks in base of channels sec- tions with flange• Each with ceiling rose and spring clipwith patented adjusting device

Pair of steel cords

Length 1,000 mm 60 210 027

One pair of steel cords required per mounting frame.

To specify e.g.:L-TOOLS through-wiring with sockets Reel with total length of approx.10 m 60 210 009