VE-W LIVING-ROOM AMBIENCE 21 Medical gases DVE-W medical gas supply provides for up to three different medical gases or vacuum per bed unit. An integral gas duct routes the copper tubes (8–12 mm Ø) from the particular outlet to the cen- tral connection point. The CU pipes used meet the medical quality specifications demanded in the relevant stand- ards. Execution (manufacture, installation and testing) of the medical gas system is in con- formity with standards. The easy removal of front panels and out- let cover plates makes the main- tenance of gas outlets very straightforward. Mains-power components Communications equipment VE-W allows to fit system com-ponents that comply with all locally applicable national standards, e.g. safety sockets, switches, momentary-action switches, dimmers, potential equalisation sockets, flush-mounted as per DIN 42 801. Execution (installation, wiring and testing) is in conformity with relevant standards. VE-W bears the CE mark. Wiring is run in separate trunking with snap-on flame-retardant plastic covers. Built-in components such as safety sockets, switches, etc. are ready for connection to the central connection point. Mini-mum conductor cross-sectional areas are 1.5 mm Communications equipment of all common makes and patient monitoring systems for relaying vital functions can be completely wired and assembled in VE-W at the factory, for instance:• Emergency nurse call/emergency call• Diagnostic call • TV/radio transmission • Network/InternetOutlets for telephone, Internet and telecommunication or data networks can be installed and wired to suit the customer’s requirements. Wiring is routed to the central connection point in separate trunking with snap-on flame-retardant plastic cov-ers. The types and grades of cabling used meet the relevant specifications.
2 for sockets, 2.5 mm
2 for protective conduc-tors (individually detachable), and 6 mm
2 for potential equali-sation.