TECTON TECNOO In this example, the emergencyluminaires are connected alter- nately to two groups, thus gua- ranteeing optimum utilisation of the supply unit. SECTION CENTRAL

esigning ONTE with TECTON Typical SECTION CENTRAL schematic

1 m Bulk material: max. height 1 m

EN1/K1EL1/K1EN1/K1EL1/K1 EN2/K2 EL2/K2

LL

Emergency operation Emergency operation Emergency operation
(20 % dimming level) (20 % dimming level) (20 % dimming level) 2 m high shelf

EN2/K2 EL2/K2EN1/K1EL1/K1EN1/K1EL1/K1

EL1/K1 EL2/K2EN1/K1EN2/K2

Emergency operation Emergency operation
(20 % dimming level) (20 % dimming level) Workshop bay: 20 m long, 10 m wide, surface area 200 m
2

K1/2/3 = Circuit 1/2/3

K1K2K3

Thanks to its two circuits (EL1/EN1 or EL2/EN2), TECTON enables standby powering of emergency lighting in the conti-nuous-row lighting system asstandard. Non-maintained or maintained mode can be selec- ted and set. No additional con-trol line is required 4 poles for two independent emer-gencylighting circuits (4 x 1.5

2

) – Clear separation of room lightingand emergency lighting– Design security during projectphase, flexibility and adaptability after commissioning