Product List - 46 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

  13. P. 40

Catalogue excerpts

Systems and Components for Roof Landscapes

 Open the catalogue to page 1

Slip Sheet and Separation Membrane    3 Root Barriers / Accessories    5 Building Protection and Elements    12 Mineral Substrates / Delivery forms    15 Substrates in Bags / Fertilizer    17 System Build-up with Aquafleece AF 300    19 System Build-up "Roof Garden" with Aquatec® AT 45 20 System Build-up "Stormwater Management Roof" 21 Pitched - and Steep Pitched Green Roofs    22 Shear Protection Accessories    23 Irrigation Units / Accessories    26 Balcony and Terrace Channel/ Systen Gutter    28 Gravel Retainer / Separation Profile    32 Clamping and Protection Profile    33 Vertically Adjustable...

 Open the catalogue to page 2

Separation and slip sheets, as loosely laid tarps or sheets, protect the waterproofing from tensile and shear forces. In the case of chemically incompatible materials (e.g. single soft PVC sheets on bitumen), a neutral separation layer has to be installed. Only permeable membranes (e.g. TGV 21), and not vapour barriers, should be used over an XPS insulation in inverted roof constructions, in order to avoid condensation within the insulation. Chemically neutral high-pressure-polyethylene sheet for application as separation and slip sheet on green roofs, for walkways and driveways; compatible with...

 Open the catalogue to page 3

Root barriers, as loosely laid tarps or welded sheets, protect the waterproofing from root penetration. This protection is mainly necessary for bituminous waterproofings. The hot-air-weldable Root Barrier WSB 100-PO is used on complicated roof areas with many upstands, penetrations, etc. and on intensive green roofs. Large-size tarps of Root Barrier WSF 40 made of special polyethylene, laid with 1.5 m overlap, are suitable for simple extensive green roof areas. In general the material compatibility of the root barrier and the waterproofing has to be taken into account. ZinCo Root Barriers WSF...

 Open the catalogue to page 4

Prefabricated Corner and Unsupported Flashing Prefabricated corner made of FPO, used for Root Barrier WSB 100-PO; compatible with bitumen. Combined inner/outer corner. Internal (IC) Corner Unsupported Flashing    1195    ca. 0.60 m X 15.00 m Roll Clamping profile, e.g. for fixation of root barriers, or pond liners to concrete kerbs or planters, made of aluminium; pre-drilled holes, spacing between the holes ca. 200 mm. Profile height: ca. 40 mm. Art. No. Length    Unit A Dam-up Element on a 0° flat roof provides long term irrigation, and is recommended mainly for intensive green roofs. It has...

 Open the catalogue to page 5

Protection Mats Protection Mats protect root barriers or root-resistant waterproofing from mechanical damages (necessary according to German Standard DIN 18195 T5, e.g. for single layer waterproofing). The mats also function as water and nutrient reservoirs and reduce subsonic noise. Protection Mats TSM 32 and SSM 45 are mainly used for extensive green roofs. On intensive green roofs and under hard surfaces, the solid Protection Mat ISM 50 and the thicker Protection Mat BSM 64 are recommended. In general, protection mats have to be installed with an overlap of at least 100 mm. The installation...

 Open the catalogue to page 6

Protection Mats Protection Mat BSM 64 Non-rotting, synthetic fibre mat made of polyester/polypropylene mixture, with stabilising carrier sheet inlay; used as protection layer on root barrier or waterproofing; extremely high water storage capacity; compatible with bitumen; biologically and chemically neutral; tearproof; made of recycled material. With proven protection efficiency in accordance with European Standards EN ISO 13428. Strength class 4; water storage capacity ca. 7 l/m2; thickness ca. 7 mm; weight ca. 650 g/m2. BSM 64 Protection Mat WSM 150 Non-rotting, thermally reinforced needle fleece...

 Open the catalogue to page 7

The Floradrain® System has been developed especially for landscaped flat roofs. The molded elements of thermoformed recycled polyolefin can store rainwater in water storage cells on the upper side and drain off excess water below. The necessary aeration of the root space is ensured. Floradrain® FD 25-E is particularly suitable for extensive green roofs with a slope while Floradrain® FD 40-E is also suitable for intensive green roofs and for terraces. With Floradrain® FD 60 neo, green roofs with a water dam-up can be created on 0°-roofs. Floradrain® in rolls is ideal for use on barrel roofs. Stabilodrain®...

 Open the catalogue to page 8

Drainage and water storage element made of thermoformed material: recycled polyolefin (htps. PE), with water storage cells, openings for aeration and diffusion; with channel system on the underside. In-plane water flow rate tested according to European Standard DIN EN ISO 12958. Compatible with bitumen and pressure resistant; butt joint installation; connection with clamps is possible. Floradrain® FD 40-E is used under extensive and simple intensive green roofs as well as under walkways and terraces, even without a slope. Compressive strength: ca. 135 kN/m2; filling volume: ca. 17 l/m2; weight:...

 Open the catalogue to page 9

Drainage and water storage element made of thermoformed recycled polyolefin (mainly PE). Developed on the basis of the proven Floradrain® FD 60; usable on both sides. Due the particularly large water storage cells FD 60 neo is especially suitable for use with intensive green roofs without water dam-up and under walkways and terraces. It can also serve as a permanent formwork to be filled with concrete as a base for other roof elements as e.g. driveways or foundations for furniture. Interlocking studs allow for a continuous and safe installation. Very stable and pressure resistant; water storage capacity:...

 Open the catalogue to page 10

Floraset® Elements contain water storage cells, openings for aeration and diffusion as well as a drainage channel system on the underside. They are especially suited for large green roof areas without slope. In particular Floraset® FS 75 is also used for the System Build-up "Pitched Green Roof" with slopes up to 25°; in this case Floraset® FS 75 Elements are installed with the studs facing upwards. Floraset® Elements are made of expanded polystyrene (EPS) and are free of CFC. Drainage board for extensive green roofs on flat roofs with and without slope; made of expanded polystyrene (EPS); free...

 Open the catalogue to page 11

All ZinCo GmbH catalogues and technical brochures

  1. Green Roof 4.0

    16 Pages

    En
  2. Zinco Product List

    41 Pages

    En
  3. Corporate Brochure

    24 Pages

    En
  4. Natureline

    4 Pages

    En