Delivery Program RIB-ROOF
30Pages

{{requestButtons}}

Catalog excerpts

Delivery Program RIB-ROOF - 1

RIB-ROOF Evolution RIB-ROOF 465 DELIVERY PROGRAM

Open the catalog to page 1
Delivery Program RIB-ROOF - 2

CHOICE FOR MATERIAL AND SURFACES EXPERIENCE VARIETY The shown materials and colours are on stock. MATERIALS COLOUR COATINGS Aluminium mill finish / stucco-embossed 0.7 / 1.0 mm Aluminium mill finish / stucco-embossed protective plating on both sides 1.0 mm AluZinc steel sheet with alu-zinc alloy Corrosion protection class III 0.63 mm mill finish or pre-weathered 0.7 / 0.8 / 1.0 mm SPECIAL SURFACES Special colours and surfaces on request e.g. in aluminium: Patina Look Zinc Look delivery will be effected with protective foil Stucco-embossed Patina Matt AluNatur available in many colour...

Open the catalog to page 2
Delivery Program RIB-ROOF - 3

RIB-ROOF Evolution

Open the catalog to page 3
Delivery Program RIB-ROOF - 4

© Profile filler - top side © Directional clip Evolution © Gutter inlet sheet © RIB-ROOF Evolution © Eaves angle Film of installation principle RIB-ROOF Evolution with directional clips 200 on wooden counter-/transverse lathing Discover within two minutes how to install RIB-ROOF Evolution with straight profiled sheets and directional clips 200. http://install-evolution-directional-clip-wooden.zambelli.de Film of installation principle RIB-ROOF Evolution curved profiled sheets with turned directional clips 70 on wooden counter-/transverse lathing Discover within two minutes how to install...

Open the catalog to page 4
Delivery Program RIB-ROOF - 5

Profiled sheets Construction width 500 mm | profile height 67 mm | authorisation approval Z-14.1-761/-762 | CE-marking according to ETA-17/1068/1069 for steel and aluminium

Open the catalog to page 5
Delivery Program RIB-ROOF - 6

Packaging unit metal roofing systems

Open the catalog to page 6
Delivery Program RIB-ROOF - 7

Ridge cap for warm roof construction maximum length 6.00 m | 3 edges

Open the catalog to page 7
Delivery Program RIB-ROOF - 8

Ventilation ridge cap for cold roof construction Assembly set with integrated ventilation closures (construction length 2030 mm), profile fillers and ridge cap (length maximum 6.00 m) | construction height 80 mm, free ventilation section 450 cm2/m corrosion protection metal roofing systems

Open the catalog to page 8
Delivery Program RIB-ROOF - 9

Cover sheet for verge maximum length 6.00 m | 5 edges | additionally available as joint connector: cutting 100 mm, up to 3 edges

Open the catalog to page 9
Delivery Program RIB-ROOF - 10

Gutter inlet sheet / eaves panel maximum length 6.00 m | cutting 312 mm | 3 edges Please indicate roof pitch when ordering gutter inlet sheet or eaves panel! Eaves angle maximum length 6.00 m Surface Dimension I Packaging Please use the order form for flashings: www.bestellblatt-kantteile.zambelli.de RIB-ROOF metal roofing systems

Open the catalog to page 10
Delivery Program RIB-ROOF - 11

Snow guard system Description Packaging Article n unit Walkways roof pitches 0° - 30° Description with anti-skid protection, incl. mounting accessories steel sheet galvanized, 250 x 600 mm Walkways also available as single steps, longitudinal walkways with balustrates, execution in aluminium / aluminium die casting and steel galvanized / aluminium die casting on request

Open the catalog to page 11
Delivery Program RIB-ROOF - 12

© Profile filler - top side © Standard clip Speed 500 © Eaves angle © RIB-ROOF Speed 500 © Profile filler - rear side © Gutter inlet sheet Film of installation principle RIB-ROOF Speed 500 with standard clips on wooden counter / transverse lathing Discover within two minutes how to install RIB-ROOF Speed 500 with straight profiled sheets and standard clips. http://install-speed500.zambelli.de Film of installation principle RIB-ROOF Speed 500 with curved profiled sheets and turned clips on wooden counter / transverse lathing Discover within two minutes how to install RIB-ROOF Speed 500...

Open the catalog to page 12
Delivery Program RIB-ROOF - 13

Profiled sheets Construction width 500 mm | profile height 65 mm | authorisation approval Z-14.1-473/474, CE-marking according to ETA-18/0034/0035 for steel and aluminium

Open the catalog to page 13
Delivery Program RIB-ROOF - 15

Ridge cap for warm roof construction maximum length 6.00 m | 3 edges Closure construction length 1550 mm | cutting 223 mm | cover length 1500 mm corrosion protection Please indicate roof pitch when ordering ridge cap! Please use the order form for flashings: www.bestellblatt-kantteile.zambelli.de

Open the catalog to page 15
Delivery Program RIB-ROOF - 16

Ventilation ridge cap for cold roof construction Assembly set with integrated ventilation closures (construction length 2030 mm), profile fillers and ridge cap (length maximum 6.00 m) | construction height 80 mm, free ventlation section 450 cm2/m corrosion protection Green roof closure construction length 2030 mm | cutting 223 mm | length 2000 mm corrosion protection RIB-ROOF metal roofing systems

Open the catalog to page 16
Delivery Program RIB-ROOF - 17

Cover sheet for verge maximum length 6.00 m | 5 edges | additionally available as joint connector: cutting 100 mm, up to 3 edges

Open the catalog to page 17
Delivery Program RIB-ROOF - 18

Please indicate roof pitch when ordering gutter inlet sheet or eaves panel! profile filler - rear side | 30 x 1000 Eaves angle maximum length 6.00 m Packaging unit RIB-ROOF metal roofing systems

Open the catalog to page 18
Delivery Program RIB-ROOF - 19

Packaging unit Walkways roof pitches 0° - 30° Description Walkways also available as single steps, longitudinal walkways with balustrates, execution in aluminium / aluminium die casting and steel galvanized / aluminium die casting on request

Open the catalog to page 19
Delivery Program RIB-ROOF - 20

© Profile filler - top side © Standard clip 465 © Eaves angle © RIB-ROOF 465 © Profile filler - rear side © Gutter inlet sheet Film installation principle RIB-ROOF 465 with standard clips on wooden counter / transverse lathing Discover within two minutes how to install RIB-ROOF 465 with straight profiled sheets and standard clips. http://install-465.zambelli.de metal roofing systems

Open the catalog to page 20
Delivery Program RIB-ROOF - 21

Profiled sheets construction width 465 mm, profile height 48 mm | technical approval Z-14.1-345/-346, CE-marking according to DIN EN 14782 for steel and aluminium

Open the catalog to page 21
Delivery Program RIB-ROOF - 23

Ridge cap for warm roof construction maximum length 6.00 m | 3 edges Material

Open the catalog to page 23
Delivery Program RIB-ROOF - 24

Cover sheet for verge maximum length 6.00 m | 5 edges | additionally available as joint connector: cutting 100 mm, up to 3 edges Please use the order form for flashings: www.bestellblatt-kantteile.zambelli.de metal roofing systems

Open the catalog to page 24
Delivery Program RIB-ROOF - 25

Gutter inlet sheet / eaves panel maximum length 6.00 m | cutting 312 mm | 3 edges Please indicate roof pitch when ordering gutter inlet sheet or eaves panel! Material Dimension (mm) Article no. High-density polyethylene for rear side of profiled sheet 30 x 930 Eaves angle maximum length 6.00 m Dimension Packaging Surface Article no. Aluminium mill finish (for RIB-ROOF 465 technically not necessary) j 40 x 20 x 2

Open the catalog to page 25

All Zambelli GmbH & Co. KG catalogs and technical brochures

  1. RIB-ROOF 465

    10 Pages