THIN-R® THERMAL PLY
4Pages

{{requestButtons}}

Catalog excerpts

THIN-R® THERMAL PLY - 1

Flat Roof Solutions High performance PIR Flat Roof Insulation Thermal Ply High Performance PIR and Plywood Composite for Flat Roofs FR/TP Key Features High Performance Rigid Insulation Thermal Conductivity 0.022W/mK Insulation and Decking in a Single Fix Compatible with most Waterproofing Systems Non-deleterious Material Manufactured without the use of CFC’s/HCFC’s Zero ODP and Low GWP Suitable for New Build and Refurbishment Projects

Open the catalog to page 1
THIN-R® THERMAL PLY - 2

Flat Roof Solutions High performance PIR Flat Roof Insulation Flat Roof Board FR /TP Thermal Ply High Performance PIR and Plywood Composite for Flat Roofs Xtratherm FR/TP Thermal Ply is a composite insulated panel of Xtratherm Polyisocyanurate core with a composite foil face, bonded to 6mm WBP grade plywood. FR/TP is designed to provide high levels of thermal insulation and decking in one operation for new and refurbishment flat roof applications. Xtratherm FR/TP Sheet Size (mm) Length 2400 Width 1200 Thickness* 56, 76, 86, 96, 106, 116 *Thickness includes 6mm plywood For new &...

Open the catalog to page 2
THIN-R® THERMAL PLY - 3

Xtratherm’s comprehensive range of BBA certified high performance flat and tapered roof insulation boards provide a guaranteed quality solution to flat roof specification. Flat Roof Insulation Xtratherm FR/TP should be fixed to a minimum of 50mm thick joists at 600mm centres max with the plywood uppermost. Boards should be staggered and butted. Each edge should have a minimum bearing of 20mm on joist. All edges should be supported - add noggings where necessary. Stagger fixings where boards are butted. Boards should be embedded in vapour resistant mastic to provide a vapour control layer in...

Open the catalog to page 3
THIN-R® THERMAL PLY - 4

Flat Roof Solutions High performance PIR Flat Roof Insulation The Xtratherm range of high performance flat roof boards provides the complete solution for new build and refurbishment. Standards Xtratherm Flat Roof range is manufactured to EN ISO 13165 under quality systems approved to EN ISO 9001:2008 quality management, EN ISO 14001:2004 environmental management and BS OHSAS 18001 Health and Safety Management System. Storage TAPERED ROOF INSULATION FLAT ROOF INSULATION Tapered Insulation for Mechanically Fixed Single Ply Waterproofing Systems Single Ply Mechanically Fixed FR/ALU — High...

Open the catalog to page 4

All Xtratherm catalogs and technical brochures

  1. WALK-R®

    4 Pages

  2. TIMBER FRAME

    8 Pages

Archived catalogs

  1. Xtroliner

    4 Pages

  2. CLOSE-R

    4 Pages