• Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

Thin-R Flat Roof [FR/BGM] - 4 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

Catalogue excerpts

Flat Roof Solutions High performance PIR Flat Roof Insulation Insulation for Partially or Fully Bonded, Torched-on, Built-up Bituminous Felt Systems FR/BGM Key Features High Performance Rigid Insulation Thermal Conductivity as Low as 0.024W/mK Compatible with Most bituminous based Roofing Systems Non-deleterious Material Manufactured without the use of CFC’s / HCFC’s Zero ODP and Low GWP Suitable for New Build and Refurbishment Projects

 Open the catalogue to page 1

Flat Roof Solutions High performance PIR Flat Roof Insulation Flat Roof Board FR/BGM Insulation for Partially Bonded, Torched-on, Built-up Bituminous Felt Systems FR/BGM is faced with a polypropylene fleece finished bitumen/glass fibre working surface and a mineral glass facing to the under side. FR/BGM is part of Xtratherm’s comprehensive range of high performance flat roof boards providing total solutions for flat roof projects. High Thermal Performance Other sizes are available subject to quantity and lead time. Compatible with most bituminous based roofing systems Roof Loading Fleece finished...

 Open the catalogue to page 2

Flat Roof Insulation Vapour Control Layer Decks should be primed before the application of the hot bitumen used to bond the vapour control layer. Reference should be made to BS 8217:1994 when applying the vapour control layer. Carry the VCL past the insulation and seal with the parapet wall. Laying (Metal Deck) On metal decks, Xtratherm FR/BGM should be laid break bonded into hot bitumen (max temperature 240°C) mopped or poured over the vapour control layer. The board can also be mechanically fixed. Ensure all edges of the boards are supported. Laying (Concrete Deck) Ensure concrete decks are...

 Open the catalogue to page 3

Flat Roof Solutions High performance PIR Flat Roof Insulation The Xtratherm range of high performance flat roof boards provides the complete solution for new build and refurbishment. Standards Xtratherm Flat Roof range is manufactured to EN ISO 13165 under quality systems approved to EN ISO 9001:2008 quality management, EN ISO 14001:2004 environmental management and BS OHSAS 18001 Health and Safety Management System. Storage TAPERED ROOF INSULATION FLAT ROOF INSULATION Tapered Insulation for Mechanically Fixed Single Ply Waterproofing Systems Single Ply Mechanically Fixed FR/ALU — High Performance...

 Open the catalogue to page 4

All Xtratherm catalogues and technical brochures

  1. THIN-R® SARKING

    4 Pages

    En
  2. WALK-R®

    4 Pages

    En
  3. THERMAL LINER

    4 Pages

    En
  4. TIMBER FRAME

    8 Pages

    En

Archived catalogues

  1. Xtroliner

    4 Pages

    En
  2. CLOSE-R

    4 Pages

    En
  3. CAVITY WALL (UK)

    4 Pages

    En