video corpo

HEBEL AAC panels - 8 Pages

Add to MyArchiExpo favorites
HEBEL AAC panels
  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

Catalog excerpts

HEBEL AAC panels HEBEL AAC-panels are an intelligent solution for industrial and commercial constructions. Buildings constructed from solid HEBEL aerated concrete ensure a high level of building quality in walls and roof.

 Open the catalog to page 1

Production HEBEL-panels are reinforced autoclaved aerated concrete elements, and are a completely cured, inert and stable form of calcium silicate hydrate. The structure is composed of very small pores which give the HEBEL material its high thermal insulation and valuable water vapour diffusion characteristics. Its high insulation values and positive ecological balance make it one of the traditional materials of yesterday, today and tomorrow. HEBEL is manufactured by a closely controlled factory process with the basic raw materials such as cement, lime, finely ground sand and water with the addition...

 Open the catalog to page 2

Hebel caracteristics 100 150 200 240 300 Thickness TH (mm) 100 150 200 240 300 Groove G (mm) - 54 54 54 54 Groove G (mm) 52 75 75 75 75 Tongue T (mm) - 50 50 50 50 Tongue T (mm) 38 65 115 155 215 Thickness TH (mm) Panel Sizes Length: 6.00m or 6.75m (max) Width: 600mm or 750mm (max) Thickness: 100, 150, 200, 240 & 300mm Shrinkage The shrinkage due to drying does not exceed 0.20 mm/m Panel shape Rectangular panels with tongue and groove edge profiles for walls or symmetric profiles along the long edges for roofs and floors. Densities Class CC/500 Class CC/600 400< ρ <500 500< ρ <600 Design value,...

 Open the catalog to page 3

Fire resistance For many years, fire walls made from HEBEL components have proven themselves in logistic companies and distributions centres. The structural fire protection conceps for these buildings become more demanding. HEBEL is the answer. HEBEL cladding panels A 150 mm thick Hebel cladding panel has 6 hours fire resistance (360 minutes). However, the fire resistance of a wall is determined by the total wall concept (BS 7621:1987). Please contact our technical service for further detail HEBEL offers protection. Aerated concrete inhibits heat transfer Spread of fire without fire protection...

 Open the catalog to page 4

Prevention from secondary fires Other material : spreading of fire through burning material that falls down or melts Aerated concrete does not melt or burn No smoke occurs upon fire Other building materials often emit a lott of smoke When a fire occurs Hebel does not emit smoke or toxic gasses. 5

 Open the catalog to page 5

Installation Hebel wall panels are suitable for use on any structure (steel, concrete or wood). Of course, work will proceed more smoothly and the cost benefits will be that much greater if, at the design stage, allowance is made for all of the features of our products. The wall panels can be mounted horizontally or vertically. Consult the HEBEL application instructions. Joints a. Horizontal mounting Where the wall panels are mounted horizontally, the horizontal joint should de filled with a foam strip (EI < 3h) or with HEBEL thin bed mortar –Ytocol (EI > 3h). Vertical joints can be sealed by...

 Open the catalog to page 6

Important notes a. The wall panels are cut to thickness using steel wire. The visible face shows the direction of cut which is apparent as the “grain” of the panel. To avoid significant colour contrasts caused by incident light from the sides, it’s advisable to always ensure that wall panels on the same façade or elevation are all mounted “ with the grain”. For this purpose, one face of all wall panels- whether horizontal or vertical mount- is marked with an arrow, on the end of each panel, indicating the direction of the main reinforcement (also for sawn panels). The arrow should always be facing...

 Open the catalog to page 7

Xella UK Unit 2, The Courtyard Reddicap Trading Estate Sutton Coldfield West Midlands B75 7BU England UK Tel. +44 (0)870 409 0306 Fax. +44 (0)870 240 2948 Hebel® and Xella® are registered trademarks of the Xella Group. The names of the architects of the projects shown in this brochure are available on simple demand. Xella assumes no responsibility for damages that can eventually occur as a result of informations given in this brochure that is elaborated with great care. Nothing of this publication can be reproduced or copied without prior written permission of Xella. R&T-11-2008

 Open the catalog to page 8

All XELLA - YTONG catalogs and technical brochures

  1. ytonG blocks

    4 Pages


    2 Pages


    2 Pages


    4 Pages


Archived catalogs

  1. Ytong

    1 Pages