VISTA EMULSION PAINT
2Pages

vista plastico en:vista plastico.qxd Emulsion paint GENERAL CHARACTERISTICS Emulsion paint for general interior use with great hiding power and high spreading capacity. Economic solution, making it ideal for walls, ceilings, warehouses and general areas that require frequent painting. Easy to apply with very good leveling end produces a smooth flat surface. SURFACE PREPARATION Surfaces should be clean, dry and smooth, free from dust, grease and loose or flaking paint. Use VITEX’s ACRYLIC PUTTY to fill any cracks or holes. New surfaces made of plaster, concrete, cement, stucco, rendering, plasterboard etc. should be first coated with ACRYLAN UNCO (micronized silicone acrylic water-based primer) or VITEX’s 100% ACRYLIC PRIMER (water-based) or BLANCO (white water-based primer) or DUROVIT (acrylic solvent-based primer). Surfaces previously covered with water-based paints or distempers (e.g. lime wash or ceiling white) must be primed with DUROVIT or VITOSIN (white solvent-based primer). COLOURS It is available in white and in white base that can be used for the preparation of an unlimited number of shades through VITEX’s COLORFULL Tinting System. PACKAGING It is available in 3 L and 9 L pails. DRYING It is touch dry after 15-30 minutes. RECOATABILITY TIME It is recoatable after 3-4 hours depending on weather conditions. SPREADING RATE 10-12 m2/L per coat on properly prepared surfaces. THINNING Dilute 10% with water. APPLICATION Apply by brush, roller or airless spray gun. CLEANING OF TOOLS Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent. VOC (Volatile Organic Compounds) CONTENT EU maximum VOC content limit values (Directive 2004/42/CE) for this product (category A/a “Interior matt walls and ceiling (Gloss ≤ 25@60ο)”, Type WB): 30 g/l (2010). This product contains maximum 29 g/l VOCs (ready for use product).

vista plastico en:vista plastico.qxd Technical characteristics VISCOSITY o 105 ± 5 K.U (STORMER, 25 C). DENSITY 1,58 - 1,60 g/ml. SOLIDS (% w/w) ~64,5 (ELOT 1028). pH 8-9. WHITENESS INDEX > 87 (ASTM E313-98). YELLOWNESS INDEX < 1 (ASTM A313-98). CONTRAST RATIO (16 m2/L) > 0,94 (ELOT 721, for white and light shades). STORAGE - NOTES 1 year in proper storage conditions (ideal storage temperature ranges from 5oC to 38oC). Stir well before use. Do not apply at temperature below 5oC, above 35oC and/or relative humidity above 80%. Allow at least 2 weeks before cleaning and washing newly painted...