| | | If you want to add a free-standing fridge with a water and ice dispenser it is necessary to plan a space sufficient for the convex door to open properly (see page 68), as well as for the socket and the water supply/drain tap to be located near the appliance. Another very impotant element | | | To install a worktop under the window, it is necessary to calculate the right height of the window sill (see page 74) and the position of the tap. If the hood is wall-hung, it is advisable to make a fumes outlet hole on the same wall, taking into account that its position will vary depending on | | the type of hood (see pages 96 to page 101). On either side of tower units a plasterboard wall creates an alcove-fitted effect. This must be made-to-measure after the tower units have been installed. | | |