New compact channel KompaqDrain® - 12 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

Catalogue excerpts

ARCHITECTURAL SOLUTIONS

 Open the catalogue to page 1

WE ARE ULMA Architectural Solutions is a member of the ULMA Group, a leading industry group in the Basque Country, and also part of the Industrial Division of the MONDRAGON Corporation, one of the largest business corporations in Spain and the largest Cooperative Group in the world. Our expertise and experience in prefabricated systems for construction has led us to develop a wide range of products aimed at four market segments: EXTERNAL WALL SYSTEM DRAINAGE    VENTILATED    ARCHITECTURAL SYSTEMS    FACADES    PRECAST R MATERIAL POLYMER CONCRETE is a high performance material made up of a precise combination...

 Open the catalogue to page 2

Compact Channel KOMPAQDRAIN® with Max Flow® system Specially designed for areas with high traffic density by ULMA Architectural Solutions, specialists in drainage system, this novel compact channel made of polymer concrete, is suitable up to load class F900, according to standard EN-1433. Motorways, airports, service stations and other intense traffic areas require high drainage and maximum safety, requirements to which KOMPAQDRAIN® responds with a combination of features that make it unique on the market. ADVANTAGES OF THE SYSTEM 1. COMPACT 2. LONG-LASTING AND RESISTANT 3. SELF-CLEANING 4. MAXIMUM...

 Open the catalogue to page 3

KOMPAQDRAIN® ADVANTAGES NON - SLIPPERY SURFACE DIRECTIONAL ELEMENTS Drive water inwards, increasing intake. Special geometry to improve the grip. LONG-LASTING AND RESISTANT It is manufactured in polymer concrete, an anti-corrosive material, which offers great durability and exceptional resistance. Suitable to all class of loads. QUICK INSTALLATION Channel and grating form a one-piece unit, ensuring greater rigidity. Ideal for areas with maximum safety requirements. Its compactness enables an easier and faster installation, reducing significantly the associated costs and maintenance. SELF-CLEANING...

 Open the catalogue to page 4

The original curved design of the inlets, together with the non-slip surface and water router, achieve the novel Max Flow® effect, increasing the water speed and the drainage capacity. Moreover, the progressive widening of the orifices helps the waste pass through more easily. Therefore KOMPAQDRAIN® can drain the same volume of water with a smaller channel. KOMPAQDRAIN® meets all requirements of the EN-1433 international standard of quality and reliability. // CURVED DESIGN OF THE INLETS // IT INCREASES THE WATER ENTRY SPEED AND THE DRAINAGE CAPACITY // PROGRESSIVE WIDENING TO PREVENT DIRT BLOCKAGE

 Open the catalogue to page 5

TRAFFIC LOAD CLASS UP TO D400 EN - 1433 STANDARD Linear Drainage Channel model ULMAKompaqDrain® KVFD200, with an integral grating, presented in one-piece and manufactured by high resistant Polymer Concrete. Vandal-proof and corrosion resistant, for underground installation at surface level. With "V" optimized shaped and capture holes with MAX-FLOW'1’ geometry: self cleaning effect at low flow, increase at maximum flow and positive opening in order to avoid dirt blockage, for areas without slope. Active surface for cutting of water sheet and for its driving to uptake holes, with non slippery protuberances....

 Open the catalogue to page 6

INDUSTRY LOAD CLASS UP TO E600 EN- 1433 STANDARD CHANNELS Iron edges, galvanized and stainless steel edges available. SUMP UNITS AND ACCESSORIES Channel    Fronts Lateral SumD Unit Code L,engt,h    width (mm) Outlet Outlet * The Sump unit can be higher incorporating an intermediate unit of 380mm. ** More info about sump units and registers on page 10. SLOPE DESIGNS

 Open the catalogue to page 7

CIVIL LOAD CLASS UP TO F900 EN - 1433 STANDARD Linear Drainage Channel model ULMA KompaqDrain® KVF200, with an integral grating, presented in one-piece and manufactured by high resistant Polymer Concrete. Vandal-proof and corrosion resistant, for underground installation at surface level. With "V" optimized shaped and capture holes with MAX-FLOW'1’ geometry: self cleaning effect at low flow, increase at maximum flow and positive opening in order to avoid dirt blockage, for areas without slope. Active surface for cutting of water sheet and for its driving to uptake holes and with non slippery protuberances....

 Open the catalogue to page 8

Stainless steel, galvanized steel or ductile iron edges available Perimetral preformed groove to facilitate joint sealing in 360° Both sides pre-marking for horizontal outlets with rapid opening geometry Pre-marking for vertical outlet with rapid opening geometry / at register unit's bottom J Both sides pre-markings for L, T and ■ I connections SUMP UNITS SUPERIOR + BASE Code

 Open the catalogue to page 9

Rapid opening geometry Male and female horizontal/vertical alignment system Base sump unit with reversible position: Ø200mm front outlet and Ø200mm and Ø300mm lateral outlets Intermediate sump unit for deeper heights Different options of male and female connectors Perimetral preformed groove to facilitate joint sealing in 360º ( at register unit´s bottom ) Pre-marking for vertical output with rapid opening geometry Optional NBR elastomer triple-lipped joint Both sides premarking for horizontal outlet with rapid opening geometry KOMPAQDRAIN® OVERV

 Open the catalogue to page 10

LLulma ulmaarchitectural.com ULMA ARCHITECTURAL SOLUTIONS B° Zubillaga, 89 - Apdo. 20 20560 Onati (Gipuzkoa) Spain Tel.: 00 34 943 78 06 00 info@ulmaarchitectural.com

 Open the catalogue to page 12

All ULMA - ARCHITECTURAL SOLUTIONS catalogues and technical brochures

  1. Product range

    6 Pages

    En
  2. S SYSTEM

    8 Pages

    En
  3. F SYSTEM

    12 Pages

    En