HYDRO SYSTEM - 16 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

Catalogue excerpts

MEETING YOUR NEEDS ARCHITECTURAL SOLUTIONS

 Open the catalogue to page 1

ULMA Architectural Solutions is a member of the ULMA Group, a leading industry group in the Basque Country, and also part of the Industrial Division of the MONDRAGON Corporation, one of the largest business corporations in Spain and the largest Cooperative Group in the world. Our expertise and experience in prefabricated systems for construction has led us to develop a wide range of products aimed at four market segments: EXTERNAL WALL SYSTEM DRAINAGE SYSTEMS VENTILATED FACADES ARCHITECTURAL PRECAST FOOD WAREHOUSES SWIMMING POOLS SPORT FACILITIES DRESSING ROOMS

 Open the catalogue to page 2

HYDRO SYSTEM ULMA, specialists in precast channelling and drainage systems, have launched a new range of HYDRO channels. EN-1433 Standard compliant and manufactured in thermoplastic matrix composite, Polypropylene (PP)/ Polyethylene (PEHD), with mineral filler reinforcement, the new HYDRO channels complement the wide range of existing Polymer Concrete products. Salón de Pinos del Manzanares, Madrid. Over 8000 metres of HYDRO channels installed. MAIN • Compatible with the full range of grates available for CHARACTERISTICS polymer concrete channels; a limited product range covers all needs • The...

 Open the catalogue to page 3

Outlet (mm) Horiz. Connection at 90º (1) (1) Every channel has two preformed side knockouts for T, L and cross connections. Slotted GRATING Material GALVANIZED STEEL LOCKING SYSTEM CLICK. Without screws LEAF GUARD Code FS90

 Open the catalogue to page 5

(1) Every channel has two preformed side knockouts for T, L and cross connections. Mesh Normal & Heelproof Single slotted GRATINGS Material DUCTILE IRON GALVANIZED STEEL HEELPROOF MESH SINGLE SLOTTED DOUBLE SLOTTED STAINLESS STEEL LOCKING SYSTEM SCREW LOCKING SYSTEM. 2 screw per metre. LEAF GUARD Type CLOSED

 Open the catalogue to page 6

(1) Every channel has two preformed side knockouts for T, L and cross connections. Slotted Heelproof GRATINGS Material COMPOSITE HEELPROOF BLACK SLOTTED HEELPROOF GREY SLOTTED HEELPROOF SLOTTED DUCTILE IRON GALVANIZED STEEL STAINLESS STEEL LOCKING SYSTEM SCREW LOCKING SYSTEM. 2 screw per metre. LEAF GUARD

 Open the catalogue to page 7

Mesh Normal & Heelproof Single slotted GRATINGS Material DUCTILE IRON HEELPROOF MESH SINGLE SLOTTED DOUBLE SLOTTED GALVANIZED STEEL STAINLESS STEEL LOCKING SYSTEM LOCKING BAR. Two locking bars and two screws per linear metre. LEAF GUARD Code FS90

 Open the catalogue to page 8

Width (mm) Z X 138 Heelproof Mesh GRATINGS Material COMPOSITE HEELPROOF BLACK SLOTTED HEELPROOF GREY SLOTTED HEELPROOF SLOTTED DUCTILE IRON SLOTTED GALVANIZED STEEL STAINLESS STEEL LOCKING SYSTEM LOCKING BAR. Two locking bars and two screws per linear metre. LEAF GUARD Code FS90

 Open the catalogue to page 9

Mesh Normal & Heelproof DUCTILE IRON MESH HEELPROOF MESH GALVANIZED STEEL LOCKING SYSTEM LOCKING BAR. Two locking bars and two screws per linear metre.

 Open the catalogue to page 10

GRATINGS Material DUCTILE IRON GALVANIZED STEEL LOCKING SYSTEM LOCKING BAR. Two locking bars and two screws per linear metre.

 Open the catalogue to page 11

1. Prepare the trench for the bedding and receiving the concrete, always taking into consideration the X, Y, Z dimensions, depending on the load class to bear. 3 2. If applicable, proceed to open the premarked assemblies, horizontal and vertical alike, using for that purpose a blade, hand saw, hammer, etc. The same way, if needed, you can easily cut the channels at wished length or at 45º angle. There is a pre-mark to cut channels at 0.5 m that keeps the tongue and groove assemblies. 3. To configure the channel line, join one after the other, using of the tongue and groove assemblies for that...

 Open the catalogue to page 12

Table 1. X Y Minimum side Minimum side thickness thickness (mm) (mm) Load according to standard EN-1433 WORK DISPOSITION Paving tiles 2. If any of the layers adjacent to the concrete footing is also concrete, always place an expansion joint between the footing and this concrete layer. 3. The upper edge or profile must not protrude above the level of the surrounding ground surface. Support layer Concrete bedding Frost-resistant ground surface Asphalt pavement Concrete pavement Expansion joint Support layer Concrete bedding Frost-resistant ground surface 4. For channels without profiles, take the...

 Open the catalogue to page 13

CE Declaration of Conformity Manufacturer ULMA Architectural Solutions Barrio Zubillaga, 89 Apdo.20 - 20560 Oñati - Gipuzkoa - SPAIN HYDROKIT, HYDROMINI, HYDROMINI PLUS, HYDRO, HYDROPLUS, HYDRO250, HYDRO250 PLUS Drainage Channel Type M to collect and conduct surface water in pedestrian areas and / or areas with vehicle traffic. Load class A15 to C250, providing the manufacturer’s installation instructions are followed Channel material Polypropylene (PP) High-Density Polyethylene (PE-HD) Grating material Ductile iron, galvanized steel, stainless steel, composite Applicable Standard Construction...

 Open the catalogue to page 14

HYDRO SYSTEM ULMA ARCHITECTURAL SOLUTIONS

 Open the catalogue to page 16

All ULMA - ARCHITECTURAL SOLUTIONS catalogues and technical brochures

  1. F SYSTEM

    6 Pages

    En
  2. S SYSTEM

    4 Pages

    En
  3. DRAINAGE SYSTEMS

    6 Pages

    En