Chimney systems - 6 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

Catalogue excerpts

Flues and chimney systems Complete systems overview

 Open the catalogue to page 1

Chimney systems rigid | single-wall Description The PP rigid ducts are suitable for condensing gas and oil boilers with a maximum ue temperature of 120°C. Several terminals are at hand and depending on the model available in black, terracotta or INOX. Plastic ue pipes expand and shrink more than metal pipes as result of temperature variations. It is important that the ue pipe can move up and downwards in the terminal. In general there are two ways of installation: the combustion air is taken from the chimney or it is taken from somewhere else. In that case the chimney is just ventilated. System...

 Open the catalogue to page 2

Technical details CE marking Temperature class Mostly in EPDM for ue pipe connections Pressure class of the system Installation types Optimal exibility combined with maximum robustness Chimney calculations possible on request Lightweight; easy to handle and easy to shorten Less risk of injuries as result of sharp edges due to plastic materials No specialist tools needed Transparent material; easy to inspect during installation or with camera after installation Full range of products; inspection parts, adapters, terminals, extensions, bends and more

 Open the catalogue to page 3

Chimney systems | rigid | single-wall Complete chimney top For 60, 80 and 110 Flue pipe can move up and downwards in the terminal due temperature variations For 80 and 110 available as double version Wind angle class A45 Complete chimney top Outer part in INOX Flue pipe in UV-resistant PP or INOX For 60, 80, 110, 125, 160, 200, 250, 315 Wind angle class A45 10 | Ubbink Centrotherm Group Flue pipes 15°, 30°, 45° and 87° bends Adaptors

 Open the catalogue to page 4

Chimney systems | rigid | single-wall Inspection parts Spacers ▪ Damage prevention during installation Available for relevant diameters System support Support parts Rigid pipes desire a rm support part at the bottom side. ▪ ▪ Small diameters; a metal support rail with PP bend Large diameters; support pipe that stands on the oor and features two gaps for a metal rail support

 Open the catalogue to page 5

United Kingdom Italy Asia Ubbink Netherlands Ubbink Belgium Ubbink France Ubbink Spain Ubbink United Kingdom Centrotherm Germany Centrotherm Italy Centrotherm China

 Open the catalogue to page 6

All Ubbink catalogues and technical brochures

  1. On-roof

    12 Pages

    En
  2. In-roof

    16 Pages

    En
  3. Roofing Products

    32 Pages

    En
  4. GAS FLUE SYSTEM

    8 Pages

    En
  5. SOLAR THERMAL

    8 Pages

    En
  6. UBBINK PV MODULE

    2 Pages

    En
  7. LIGHT BROCHURE

    8 Pages

    En

Archived catalogues

  1. Solar Module

    2 Pages

    En