®

MOUNTING and SCREWS Once inserted in the support upright holes, the kit is oriented and then fastened to the support using stainless steel self-tapping screws (SFS Intec SN5/9- S-7504K – 5.5 x 19 or 22 mm TH8 or similar). Adding a profiled mask hides both the screws and the back of the mounting plate.Mounting screws and view of the system aftermounting, SHAMAL 20 system champagne sunscreens spacing : 200 mm (site Castelnaudary, 08/04) matrix 115 cm.

SHAMAL

(See diagram 3 – mounting) SUPPORT UPRIGHTS Shamal kits can be fitted to aluminium alloy uprights. Terreal provides a supporting section combined with a mask. These 2 sections are 2995 mm long. The support section is fitted with holes every 300 mm (10 holes/strip) or 200 mm (15 holes/strip). These holes are used to fit Shamal kit mounting plates. (See diagram 2 - section)
SECTION Diagram 2 MOUNTING Diagram 3 TEST SITE AT CASTELNAUDARY Diagram 4 edition No.6 2005 116