PITERAK

®

(see diagrams 4 and 6). The Piterak® system is regulated by Technical Approval (CSTB) N °2/04-1071. (see diagrams 3 and 5). ? or fixed onto a wall by the intermediary of aspecial wood or metal mounting structure standing off the wall to permit the construction of a cladding with integrated thermal insulation (insulated cladding)

DESCRIPTION

The Piterak® is a double-skin cladding product, thin at 4 cm,with overlapping horizontal joints providing greater protection against the rain. The aesthetic effect of a Piterak® façade, with its clear contours and its emphasis on the horizontal, is very dif- ferent from that of a Maestral façade. It is available with three surfaces and in six colours. The Piterak® is an external wall-cladding system,based on double-wall terracotta panels, mechanically fixed with interlocking by means of metallic clips (stainless steel X5CrNi18-10 (1.4301) fasteners) using two possible methods: ? either fixed onto the concrete or masonry wall,by means of a special mounting structure (non- insulated cladding)

PROPERTIES

• Piterak® Piterak® terracotta panels meet the specifications of NF P 13.304 and EN ISO 539.2 Method C standards. The product has good impact resistance (according to AFNOR NF P 08.301 and NF P 08.302 standards.Furthermore, the ease with which a piece can bereplaced permits Piterak® to be changed anywhere on the façade without any particular complications. Its qualities regarding the effect of pressure / depression due to wind (>1600 Pa) enable it to obtain safety coefficients sufficient for use on high buildings. The Terreal Piterak® also meets the following standards: > Expansion in contact with humidity (accordingto NF P 13.304)> Water absorption (according to NF P 13.304) > Characteristics of dimensions (according to ourspecifications dated 1999-12-06 – 5 pages).> Resistance to efflorescence (NF P 13.304) > Resistance to shattering (NF P 13.304) > Resistance to frost (EN ISO 539.2 Method C)

Diagram 1
NUMBER OF CLIPS ProductProductCode Dimensions (mm)H x L x thQuantityof productsU.weight(kg)Weightper m
2 Standard right
(id. for left) (1)prod. code P9901 Upper (kg)Module(mm)
prod. code P9902 Piterak 20
2 16,7200 x 1530 to 15403,3/m 55217 x 1520 x 40PIT013,3/m
2 1,3/lm Piterak 25
2 21,2250 x 1530 to 15402,6/m 55267 x 1520 x 40PIT022,6/m
2 1,3/lm Mitred anglePiterak 20 right
2 16,5200 x 1530 to 15403,3/m 54217 x 1520 x 40PIT113,3/m
2 1,3/lm Mitred anglePiterak 20 left
2 16,5200 x 1530 to 15403,3/m 54217 x 1520 x 40PIT123,3/m
2 1,3/lm Mitred anglePiterak 25 right
2 21250 x 1530 to 15402,6/m 54267 x 1520 x 40PIT132,6/m
2 1,3/lm Mitred anglePiterak 25 left
2 21250 x 1530 to 15402,6/m 54267 x 1520 x 40PIT142,6/m
2 Standard section
2 6,11530 to 1540- 1,46146 x 3000 x 46PIT300,65lm/m Angle section
2 6,61530 to 1540-1,3/lm-- 2,269 x 3000 x 69PIT400,33lm/m
H = height - L = length - th = thicknessTime required: 20 min/m www.terrealfacade.com 2 (for the main body of the work)The quantities were established for horizontal joint of 1,2 cm and vertical joints of 1 cmIdentical values whatever the finish: smooth, sanded, grooved* 1520 is the maximal length of the productFor other lengths , please contact us

101