| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | replacing a broken part | | |
| | | |
| | | Finish breaking the Facing tile suppliers so that it can be split into two separate parts. Each part can then be removed from its support. | | |
| | | To replace it, about 7 mm must be removed from the upper part of the tile. | | |
| | | |
| | | |
| | | Use a circular saw to cut the part of the Tile to be removed (Before installing the Tile, add a strip of Skaflex Fro 11 Fc mastic in the groove along the bottom edge of the tile and on the lipped edge of the upper part). | | Fbsition the tile by first inserting the FRplacement complete. upper part. The lower part will then rest on the lower elements. | | |
| | | |
| | | |
| | | grid T = width L + vertica joint Jv | | |
| | | methods of gauging | | |
| | | Specific edging (zinc, aluminium, window frame... ) to the limits of the area covered /(water drainage in upper part) Rail instaled on the | | |
| | | Clipped angle piece | | |
| | | |
| | | Rail invisible at the top | | |
| | | width L | | |
| | | |
| | | |
| | | Vertical joint Jv | | |
| | | |
| | | X | | |
| | | |
| | | Externa angles | | |
| | | |
| | | |
| | | - 1/ angle ^ piece | | |
| | | |
| | | intermediate strip | | |
| | | |
| | | |
| | | (at least 2 strips rraintaned per product) | | |
| | | |
| | | Corner treatment: vertical cutout | | |
| | | |
| | | Longitudinal joints or crossed joints | | |
| | | i | | |
| | | |
| | | z! | | |
| | | |
| | | 'ID | | |
| | | |
| | | real width L | | |
| | | |
| | | Interna angles joining product cut straight | | |
| | | Externa angles: „2/ specific edging | | |
| | | |
| | | 7 | | |
| | | Vertica cutout of a product | | |
| | | Cent re di st ance between vertica uprights (primary framework): according to resistance to wind and impact required | | |
| | | ] Terracotta product I Aluminium rail ■ Specific edging : Rimary framework (meta or wood) | | |
| | | Horizonta cutout of a product under a strip (at least 2 strips maintained per product) | | |
| | | Specific trim (zinc aluminium...) at the lower limits of the area covered: eventua use of standard anti-rodent features | | |
| | | |
| | | |
| | | Rail invisble in the lower part | | |
| | | Rail on intermediate strip | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | > All the terracotta façade solutions | | |
| | | www.te rrealfacade.com | | |
| | | |
| | | |
| | | 65 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |