FACING TILE
FEATURES
(see diagram 16) .On demand, Terreal also propose a stainless steel 2/4
rail. The Facing tile is a single-skin cladding product which is easyand economical to install (with a lightweight system resting on
horizontal rails).
The overlapping horizontal joints give better protection against
the rain. Available with two surfaces and in five colours, the
Facing tile offers the best value for money on the market. The Facing tile is subjected to technical specificationsby Terreal, concerning the product technical features
and installation. The parts which compose the Facing
tile system are in conformity with the NF P 13.304
and EN ISO 539.2 Method C standards.
? Shock-resistance: until Q3 (P08.301 – P08.302 norms)? Normal wind resistance in depression in weightedvalue for an interaxial distance of 600 mm: 1500 Pascals.The supporting 2/4 rail is: Folded aluminium alloy (corrosion-resistance for
exterior use)
DESCRIPTION
External wall-cladding system, based on single-wall
terracotta panels with specially designed section
for simple installation by suspension and
interlocking with longitudinal hanging lips on the
back of the product.
The raiser upper edge of the tile ensures the rigidity
of the structure.
The Facing tiles supplier offer a flat terracotta façade. The
hollow horizontal joints of 1 cm are chamfered. (see diagram 1) . (see diagram 3) . The tiles are installed on 2/4 rails. These are fixed to
a framework which includes the insulation and are
attached to the wall allowing the realization of
walls type XIII (see diagram 2). ? Wall-cladding installation (insulated cladding) The tiles are installed on rails directly on the
waterproof concrete or masonry wall allowing the
realization of walls type III
APPLICATIONS
? Direct installation (non-insulated cladding)
Diagram 1
The Facing tiles constitute a protective covering forthe façades of new or old buildings and are
maintenance-free.
2 types of installation:
ProductFacing tile Dimensions (mm)H x L x th ProductCode Quantityof products U. weight(kg) Weightper m
2 Module(mm) (kg) 240 x 300 x 14240 x 380 x 14 TDB01TDB02 13,3/m
2 2 2,83,53,4 37,037,013,6/lm250 250 x 305250 x 385 10,3/m Angle tile 244 x150 x 40 x150TDBA11 4/lm Right or leftangle clip -T97078/lm0,040,32/lm250 Aluminium2/4 rail 40 x 3000 x 20TDB304,2lm/m
2 1,652,31/lm250 Stainless steel2/4 rail 40 x 3000 x 20TDB404,2lm/m
2 1,652,31/lm250
H = height - L = length - th = thickness - R = angle returnTime required: 40 min/m 2 (for the main body of the work)Timerequired for treatment of particular points: 1 h / lm(corners and opening jambs) www.terrealfacade.com 59