CTS
• Composition of the structure: same as the CTA structure. • Base: • Adjustment system: same as the CTA structure. same as the CTA structure. • Head: same as the CTA structure. • Stringers: horizontal, 10/10 thick, suitably moulded using a folding press so as to form a “U” with sides of 18x25x18 mm, fitted with anti-static, airtight and dust-
proof gaskets guaranteeing the stability of the whole. • Composition of the structure: same as the CTA structure. • Base: • Adjustment system: same as the CTA structure. same as the CTA structure. • Head: same as the CTA structure. • Stringers: horizontal, 10/10 thick, suitably moulded using a folding press so as to form a “U” with sides of 30x25x30 mm, fitted with anti-static, airtight and dust-
proof gaskets guaranteeing the stability of the whole. • Costituzione struttura: same as the CTA structure. • Base: same as the CTA structure. • Head: same as the CTA structure. • Stringers: horizontal, 10/10 thick in square-section, tubular metal 25 x 25mm, fitted with anti-static, airtight and dust-proof gaskets guaranteeing the stability of the whole. • Adjustment system: at the centre of the plate a tension rod is screwed on with relative anti-back-off nut providing micrometric adjustment of the final height. •Adjustment system: same as the CTA structure.
CTS
• Stringers: with connective and load-bearing functions, these are rectangular section bars of 50x25 mm, 1 mm thick; available in the following lengths: 2400 mm/1800 mm/550 mm. The stringers are fitted with self-adhesive anti-static gaskets designed for coupling with the
contemporary panels of the raised floor. Structure composed of Base resting on the slab floor and Head which the stringers rest on.
• Base: with plate of 95 mm diameter 1.5 mm thick, suitably moulded for attachment with a non-grooved, cold galvanized shaft measuring 20x2 mm.
CTT
CTR
•Head: supports the stringers by means of a square plate 110x110 mm 3 mm thick with lateral screws M5x10 for attachment to the stringers. The edge of the plate is suitably shaped for insertion of the stringers.
CTR CTT CTTR
41