| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | fascias | | |
| | | |
| | | planning with fascias | | |
| | | |
| | | The following should be taken into consideration when planning with District Fascias | | |
| | | |
| | | monolithic fascias • Base fascias can have a monolithic look or can be split with a mounting reveal at 6" height. The mounting reveal is required to mount home storage to home panels and for mid gable panel wall connections (see Storage Supports section) • 29" high base fascias can only be applied to a Flush Panel Wall (UNPF), and not on an Elevated Panel Wall (UNPE) because the Elevated Panel Wall uses a different frame modern structure at the base, and cannot be converted | | |
| | | |
| | | To obtain a monolithic look, a 29" base fascia is specified, covering the 6" high mounting reveal on a flush panel wall | | |
| | | To maintain a mounting reveal, a 23" and 6" base fascias can be specified for a flush panel wall. Elevated panel walls always have mounting access at the base rail and only accept 23" high base fascia | | |
| | | |
| | | • grain direction | | |
| | | |
| | | |
| | | fascia widths On panel walls over 66" wide the upper fascias can be split into two segments -yk-66" - 96" panel widths can have separate fascias | | |
| | | |
| | | Applying two equal width upper fascias on panels allows for the mounting of storage components as it creates a vertical reveal for the architectural cabinet to mount to The width of the storage must be half the width of the panel wall on panel widths over 66" Compatible overhead storage widths are 36", 42" and 48" wide only | | |
| | | Upper fascias span the full width of panel walls, however they can also be specified as two equal width fascias for panels 66" and wider | | |
| | | |
| | | Opposite sides of panel walls can be specified differently with continuous fascia on the side and two equal width fascias on the other side | | |
| | | |
| | | Base fascias always span the full width of panel walls | | |
| | | |
| | | |
| | | accessory rail | | |
| | | |
| | | The accessory rail is a single rail integral to the fascia at 36" high on the upper fascia and is available on the following fascias: contemporary fabric, wood, fascia laminate (grade 2), Seamless Color The following Personal Organizers (PAX) are compatible on panel walls with and without worksurfaces: Divisional Sorters (PAX90,PAX91), Trays (PAX92, PAX93), Pencil Tray (PAX94), Media Organizer (PAX96) | | The following additional Personal Organizers are compatible on panels without worksurfaces: Binder Bin (PAX95), Telephone Shelves furniture (PAS97, PAX98), and Vertical Organizers (PAX99, PAX100). See Complements: Teknions Ergonomics & Accessories program) Organizing Tray (YWOT), do not mount to the accessory rail. (see Complements: Teknions Ergonomics & Accessories program) | | |
| | | |
| | | district application guide - September 17, 2007 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |