| | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | | | |
| | | |
| | | District provides a variety of panel walls for space division, distribution of power and support. | | |
| | | |
| | | See Fascias section for fascia options Flush panel wall frames have no finish options, the frame is black only Elevated panel wall frames are black with base trim finish options of Foundation, Mica, or Anodized Single Double | | |
| | | |
| | | 33 | | |
| | | |
| | | Flush Panel Wall (UNPF) Panel walls are sized to match home workstation sizes, providing a clean aesthetic look, and are available in heights to match standard Teknion datum lines of 42", 51", 66" and desk height of 29" Stability is provided by home storage, return panel walls, desking and wall starts | | |
| | | • Includes vertical and horizontal slots with standard Teknion hook patterns Two-way hardware is included for 180° connection, but all trims must be specified separately • Overhead storage can be mounted to the 51" and 66" high panel walls, on-module only • Panel walls are 2 7/8" thick | | |
| | | 9"-37" h | | |
| | | |
| | | Add-On Window Single Glazed (UNPWS), Double Glazed (UNPWD) • Mounts to the top of a panel wall and can be mounted on-module or semi off-module • Non load bearing and cannot accommodate an accessory rail • Trims must be specified separately • Available single- and double-sided | | |
| | | |
| | | |
| | | |
| | | Panel Wall Foot (UNPEF) Required at the base of Elevated Panel Walls (UNPE) Can be shared between panel walls, so the number required is based on the panel wall configuration Not required at corners as the corner design post specified provides the support for panel walls | | |
| | | 29", 42", 51" and 66" | | |
| | | |
| | | » Requires Panel Wall Feet (UNPEF) for support (specified separately) | | |
| | | |
| | | |
| | | district application guide - September 17, 2007 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | |