MULTIFUNCTION BRISE-SOLEIL Architects: Nuno Leónidas and Frederico Valsassina Photography: TECHNAL

/ BETWEEN DESIGN AND EFFICIENCY A SOLUTION SERVING YOUR PROJECTS To meet the multiple needs of building envelopes and particularly of glazed facades: sun protection, solar gain control, optimisation of natural light and customisation, Technal has created SUNEAL, a careful balance between attractive design and efficiency. A WIDE CHOICE OF SOLUTIONS SUNEAL brise-soleil or sunshade can be integrated in all design options of GEODE-MX curtain walling: Trame Horizontale and Trame Verticale, structural sealant glazing (SSG), beaded glazing (BG) and roof lights as well as on an independent structure....

A WIDE CHOICE OF SOLUTIONS 1. ON FACADES • SUNEAL brise-soleil envelopes the whole of the GEODE-MX curtain wall range from the simple grid facade to structural sealant glazing or beaded glazing solutions. • Fixed blades of 100 mm and 150 mm, as well as a 215 mm blade which can be equipped with photovoltaic cells, are adaptable to the curtain wall. • A complete selection of accessories allows installation: ·· on a canopy, ·· on an offset vertical structure, ·· or on a roof light. • SUNEAL brise-soleil is installed on a totally independent structure. • A wide choice of brise-soleil blades is available:...

BRISE-SOLEIL BLADES FOR INTEGRATION INTO GEODE-MX CURTAIN WALLING SINGLE-PIECE BRISE-SOLEIL BLADES • Vertical or horizontal blades. • 100 to 300 mm. Finishing cover • Horizontal blades. • Installation: ·· on aluminium structure offset from the facade (1), ·· on canopy with stays (2), ·· on roof light (3), ·· on independent bearing structures. • Fixed or mobile. • Continuous blades on aluminium clamps. ·· Angle : 0°, 15°, 30°, 45°. • Installed between uprights (steel, aluminium or wood primary structures). ·· Free blade angle. 2 Screw flanges, outer sight line Retractable pins, outer sight

MULTI-PART BRISE-SOLEIL BLADES SEMI-ELLIPTICAL BRISE-SOLEIL BLADES • Fixed blades. • Horizontal or vertical blades. • From 350 to 600 mm. • Continuous horizontal fixed blades. • Installed between uprights. Photography: TECHNAL

SPECIAL BLADES 100 x 25 120 x 23 180 x 30 RECTANGULAR 207 x 30 • Blade 300 x 40 mm. 240 x 40 • Installation: continuous or between load270 x structures. bearing50 LOUVRE • Louvre blades 100 and 115 mm. • Attached to an independent structure or to a supporting aluminium profile. 50 • Integrates with the standard cladding structure. Louvre on aluminium bearing structure LARGE PERFORATED BLADE • Combines elegance and the lightness of aluminium, horizontal or vertical. • The shade effect can be improved due to the perforation of the sheet with 40% or 28% open area. • The 580 mm SUNEAL perforated...

ROTATING BLADES FOR OPTIMUM COMFORT FIXED OR MOBILE FOR OPTIMUM COMFORT To use the effect of the sun in the choice and orientation of a brise-soleil, the sun’s position at all times must be known. Enjoy the benefits of solar gains in winter and sun protection in summer, finely control the natural lighting of interior rooms. 300 mm motorised blades - Angle 15° Architects: J-P. Dhalluin and P. Peny Photographer: Patrick Loubet 300 mm motorised blades - Angle 45° AUTOMATIC ROTATION BY MOTORISATION • Blades 180 to 300 mm. MANUAL ROTATION BY SEQUENCER • Blades 180 to 270 mm. Operated by electric actuator...

MATERIALS AND COMPONENTS As with all Technal systems, only the highest quality materials and components are used for low maintenance and long-term performance. • The aluminium profiles are extruded from alloys 6060 Building compliant with EN 12020, EN 5733, EN 515 and EN 775-1 to 9. • Fittings are cast from EN 12844 compliant Zamak 5. • Screws are made of stainless steel. INTEGRATION IN GEODE-MX CURTAIN WALLING • Attached to an aluminium structure offset from the facade. • Blades clipped onto aluminium supports. • Linked to GEODE-MX curtain walling by fixing lugs for vertical structure or cross-beams....

IMAGINE WHAT'S NEXT 5355.004 - October 2018 - Non contractual document