Trisomet®
48Pages

{{requestButtons}}

Catalog excerpts

Trisomet® - 1

Trisomet® External roof and wall panel system

Open the catalog to page 1
Trisomet® - 2

Contents 4-5 Introduction and benefits 6 Platinum Plus® system guaiantee 7 Coloicoat® products and services 8-10 System performance data 11 Summary of Building Regulation requirements for the conservation of fuel and power 12-13 Roof application model specification 14-24 Roof construction details 25 Jaffabox case study 26-27 Wall application model specification 28-38 Wall construction details 39 Fasteners, sealants and fillers 40-41 Site guidance 42-43 Roof installation 44-47 Wall installation

Open the catalog to page 2
Trisomet® - 3

Tata Steel Tata Steel is Europe's second largest steel producer. Our comprehensive range of high quality products and services are supported by steel making sites in the UK and The Netherlands, a European-wide distribution and service centre network and downstream businesses ranging from tubes and building systems to plating. Our approach to business is unique. We believe our strength is how we build collaborative relationships that create new success for our customers, adding value to their business and helping them to perform in their markets. As a company, we are dedicated to managing...

Open the catalog to page 3
Trisomet® - 4

Trisomet® Trisomet® is an insulated panel manufactured as a single component suitable for both roof and wall cladding applications. As a one-fix component its consistency enables speed of installation and with a wide spaced trapezoidal steel external skin provides optimum performance for water drainage, strength and walkability. Technical Services Our dedicated building envelope technical team are available to provide support and advice on the best product for your project. They are on hand to help with: • Detail design. • Wind and snow loading. • U-value calculations. • Load span checks. •...

Open the catalog to page 4
Trisomet® - 5

Case study Llanwern House, Llanwern Works, Newport Llanwern House, the new, energy efficient reception hub at Tata Steel’s Llanwern Works in Newport, features a cavalcade of our building envelope and structural solutions. The building has been entirely constructed using solutions by Tata Steel and has three floors. The ground floor will house conference facilities as well as a visitors' induction area. Floor One and Two feature an open-plan working environment, housing 200 employees. Client: Tata Steel Architect: Boys Rees Main contractor: Dawnus Envelope installer: Coverstructures South...

Open the catalog to page 5
Trisomet® - 6

Main contractor: Barnwood Construction Ltd Cladding system: Trisomet® and Trimapanel Colorcoat® product: Colorcoat HPS200 Ultra' in Goosewing Grey and Colorcoat Prisma® in Silver Metallic Platinum Plus® system guarantee Platinum Plus® provides a complete building envelope solution guaranteed for 25 years. Designed in collaboration with our innovative supply chain of leading component manufacturers, our comprehensive portfolios of high quality products are fully integrated to provide the widest range of roofing and cladding systems. The Platinum Plus® guarantee includes, amongst others, the...

Open the catalog to page 6
Trisomet® - 7

Colorcoat® products and services Trisomet® is only supplied with Colorcoat® pre-finished steel for the external and internal skin so that we can provide the very highest quality and service to our customers. Colorcoat® products and services Colorcoat® High Reflect The Colorcoat® brand provides the recognised mark of quality and metal envelope expertise exclusively from Tata Steel. For 50 years Tata Steel has developed a range of technically leading Colorcoat® pre-finished steel products which have been comprehensively tested and manufactured to the highest quality standards. Colorcoat®...

Open the catalog to page 7
Trisomet® - 8

General panel information Thickness, t (mm) Maximum length (mm)1 Minimum length (mm) Cutback (mm)23 Minimum Maximum Weight (based on thickness mm) (kg/m2) 40 60 80 100 120 135 Tolerance is in accordance with BS EN 14509. General reference All measurements throughout this brochure are referenced in mm unless stated otherwise. Technical illustrations are not to scale. The panel length is measured by the length of the external sheet, as shown above. Lengths over 14000 mm will be subject to additional delivery charges. Panels will always have one flush end and one cutback end; therefore, they...

Open the catalog to page 8
Trisomet® - 9

Safe imposed (positive) loads (kN/m2) Span condition Core thickness (mm) Safe wind suction (negative) loads (kN/m2) Span condition Core thickness (mm) Span (m) If safe loading shown above is not satisfactory to your requirements, it is possible to adjust performance by using alternative fastener layouts, purlin specifications and/or deflection limits. For further information please contact the Technical Department T: +44 (0) 1244 892199.

Open the catalog to page 9
Trisomet® - 10

Thermal performance Trisomet® complies with the minimum requirements of the conservation of fuel and power sections of the Building Regulations for England and Wales (Part L2) and Scotland (Technical Handbook Section 6 Energy). The panel construction offers highly consistent insulation performance, and the site-formed junctions provide a practical and effective method of ensuring good thermal performance. Water penetration In accordance with product standard BS EN 14509, the watertightness of a system should be tested to EN 12865. The standard advises that the system should achieve...

Open the catalog to page 10
Trisomet® - 11

Introduction to changes The latest amendment to the England AD-L2 and Wales Part L Regulations for the conservation of fuel and power (2013) came into effect on 6 April and 31 July 2014 respectively. The revision to Section 6 Scotland is scheduled for 2015. AD-L2 follows the principle of the 2010 Regulations but with significant changes in the definition of the types of buildings that make up the aggregate mix. As before, the whole building is assessed using the SBEM 'whole building methodology' that expresses the energy performance. Since it is the building services that emit CO2 and not...

Open the catalog to page 11
Trisomet® - 12

H43 Insulated panel cladding/ covering 120 Insulated steel faced roof panel: Tata Steel, LPCB approved T risomet®. Cladding systems in England and Wales to be designed and installed to meet the Building Regulations 2000, Approved Document L2 2013. Cladding systems in Scotland to be designed and installed to meet the Building Standards (Scotland) Regulations Technical Handbook: Section 6 Energy. - Support structure: Steel purlins. - Bearing width (minimum): 60 mm end lap extension plates maybe required where three or more panels comprise the total roof slope. - Pitch: 4 degree minimum. -...

Open the catalog to page 12

All TATA STEEL catalogs and technical brochures

  1. Forcas

    8 Pages

  2. Colorcoat GP

    2 Pages

  3. Hybox® 355

    16 Pages

  4. ComFlor manual

    92 Pages

  5. RoofDek

    24 Pages