Catalogs >
Systemair >
Systemair Diffusers

Systemair Diffusers
6Pages

Catalog excerpts

Systemair Diffusers www.systemair.com

Sinus C Sinus, supply diffuser for ceiling assembly. It has a front plate with a number of nozzles, together with a main body plus connection sleeve fitted with a rubber seal tested for airtightness. The nozzles can be individually set at any angle within 360°, which means that an unlimited number of distribution patterns can be set, also after installation, without affecting noise levels, air volume or pressure drop.The nozzles rounded edges prevent dust from setting and facilitate cleaning. Sinus should be fitted onto a PER plenum box with removable damper and test points. They can also...

Open the catalog to page 2

TST a circular supply diffuser.The distribution pattern can be altered and the gap width is adjustable.A shielding device is included which can be used to alter the distribution pattern to a direction (180°) pattern. Should be installed with plenum box PER. Air flow 200-700 m3/h TSK is a supply diffuser and a perforated version of TST for ceiling installation.The two-part diffuser unit can be adjusted to provide the desired throw. Should be installed with plenum box PER. Air flow 100-800 m3/h Konika is a supply and exhaust air diffuser for ceiling assembly. It is suitable for offices, shops...

Open the catalog to page 3

Air perfomance test in Development Center TSO installed in shop Sinus B is a wall-mounted diffuser that combines the functionality of nozzles with high flow capabilities of perforation and appealing design. The result is a performing diffuser very suitable for cooled air; achieves high induction and short throw. Sinus B is available with either rear connection (Sinus BR) or side connection (Sinus BS). ø100-200, air flow 60-350 m3/h TSO, a square perforated ceiling diffuser with PER plenum box as an accessory.The distribution pattern can be altered with the SSO shielding accessory to one-,...

Open the catalog to page 4

The SPI is an iris damper for measuring and adjusting the air flow. It has low noise level, centrically-formed air flow and fixed test points for precise measurements. The damper also has an adjustment aperature which can be opened completely, which means there is no need for an access door for cleaning. Available in sizes ø80-630. Konika-A, multi cone diffuser for ceiling assembly.The diffuser consist of an external cone and an adjustable double center cone.The double cone can be adjusted for changing of the distribution pattern from horizontal to vertical. ø160-500, air flow 200-3000 m3/h...

Open the catalog to page 5

Systemair AB • SE-739 30 Skinnskatteberg, Sweden • Tel +46 222 440 00 • Fax +46 222 440 99 Systemair • January 2007 • Inhouse studio • Art no E8034 mailbox@systemair.se • www.systemair.com

Open the catalog to page 6