| »> TECHNICAL DATA Main voltage: 230V/AC/50HZ or 12/24V AC/DC Nominal effect: 35W Class: II IP-Class: IP20 or IP65 Equipped with: Electronic built-in transformer 230V/12V/35W Halogen bulb - 35W/GY6.35 ». MOUNTING INSTRUCTIONS Mount the rustic lamp on a horizontal surface with the four attached M4-screws. Hole pattern, see dimensional drawing on page 13. Available for the Gooseneck arm and Spot arm are also Sunnex mounting accessories; Magnetic base, C-clamp, Wall bracket and Desktop base. Plug in the cordset to 230V main socket. On/off function is handled with switch in lampbase. »> CHANGE THE HALOGEN BULB Disconnect cordset from main socket. Allow the bulb to cool down for a few minutes. Unscrew the screws holding the front part of lamphead, pull out the broken bulb and replace with a new bulb. Do not touch the bulb with bare hands! Screw front part back in place. |