| | | The sketch 3D is produced and visualized in real time to the immission of the data 2D. because every graphic object contains the information related to the plan of affiliation. The whole information are managed by the General Altimetric System, From the sketch 3D is possible to get Sections (also broken and with the stratigraphy of the masonry), or axonometric sections, profiles and perspective sights. The realized sketch 3D can be visualized according to various static or dynamics sights and elaborated with ArTeN Render. The multilayer walls can be visible in 3Dcomplete of their stratification. This type of visualization involves notable advantages in worth to operations that also implicate the detail of the stratification of the wall In 3D, and particularly: .Sections. .Different coloration of the inside Component in comparison to the external Component of the Wall. A simple, complete and interactive interface allows the user the automatic creation of the sketch of staircases suppliers' bodies, in which all the pcameters of project can be detailed and defined (gradient to overcome, lift, kick, etc.). With ArTeN A 4D typologies of staircases are created to one or more rectilinear ramps, to arc or helical ramps. On these it is possible to visual ze the complete insole or only the kick, a central beam or two side beams, connected or less to the concept of altimetry "SGA". The visualization 3D will happen in real time, as for any other architectural element. Possibility to modify the dimensions and the form of every single kick. The command "Ramps" follows the same philosophy, in order to give to the user the maximum liberty of creation of the object. The functionality of "Handrails furniture" insertion exploits the solid elements of ArTeN A 4D, it allows the automatic creation of the sketch of handrails, with manual or automatic insertion of the same on staircases and ramps. Also the Continuous Facades use the solid elements, which give the possibility to define the profile of the uppercuts and the position of the home panel (glazed or less). The procedure of creation of the coverages simplifies enormously what concerns the sketch but also the calculation of the strata of the same. It is possible to insert trap building doors, rustic windows of stratum and building skylights (of various forms with preview of sketch) editing the information in interactive way, the all both in 2D and in 3D. Other functions allow the creation of the Fireplaces 2D and 3D according to normative and the automatic sketch of Eaveses. Possibility to modify the form and the inclination of the strata using the grips set on the vertexes of the some. The command "Plot Roof" allows to draw and to modify the principal and secondary "joisting" (Plot), and the boarding, relatively to the single strata of coverage of the roofs. | | |