| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | ECIFICATI | | STRUCTIO | | |
| | | |
| | | SPECIFICATION & CONSTRUCTION | | |
| | | |
| | | SCT & SET Model (Rise: 2500mm ~ 6000mm) | | |
| | | Technical Data for SCT & SET Model (Rise 2500mm~6000mm) Specification | | |
| | | |
| | | |
| | | | | | | | | | | Part | Description | | | | | Handrall | Synthetic Rubber | | | | Handrall Frame | Aluminium | | | | | | | | | Floor | Comb | Aluminium / Gray | | | | Comb Plate | Aluminium / Gray | | | | Cover Plate | Stainless Steel(Standard) / Aluminium(Option) | | | | Pallets | Pallet | Stainless Steel(Standard) / Aluminium(Option) | | | | Demarcation Line | Without | | | | | | | | | | |
| | | Minimum clear floor access area in front of the landings measured from newel end: 2000 2.5m*Travolator width or 2.0m*twice of Moving Walk Width p | | |
| | | |
| | | |
| | | | | | | | | | Type | 1200 Type | | | | Effective Width | 1200mm | | | | Pallet Width | 1004mm | | | | Speed | 30m/min | | | | Gradient | Slope type : 12° | | | | Motor | AC Three-phase induction motor | | | | Operation | Reversible key switch | | | | | | | | | |
| | | |
| | | Dimensions | | |
| | | (units : mm) | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | No. of Flat Step | Angle of Inclination | | | | | | | | | | | | | | Rise(H) | Type | | B | C | D | E | _L | J | K | | | | | | 2500~6000 | 1000 | 2390 | 2290 | | | | | | | | | | SCT12 | 12° | 1200 | 2290 | 1960 | 1960 | 843 | 760 | 992 | 1072 | | | | /SET12 | 6050~7000 | 1000 | 2890 | 2390 | | | | | | 1200 | 2790 | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | | | | | | | | | | | | | | Flat Step | Angle of Inclination | Rise(H) j Type j W | W1 | W2 | W3 | | | | SCT12 /SET12 | 12° | 2500~6000 | 1000 | 814 | 1026 | 1356 | 1456 | | | | 1200 | 1014 | 1226 | 1556 | 1656 | | | | 6050~7000 | 1000 | 814 | 1026 | 1356 | 1456 | | | | 1200 | 1014 | 1226 | 1556 | 1656 | | | | | | | | | | | | | | | |
| | | | | | | | | | | | Reaction | | | | (units : kg) | | | | | R1 | R2 | R3 | R4 | | | | 3 | (L1+L2)XT+P | L3XT+Q | (L1+L2+L3)X1.35XT | - | | | | 4 | L1 XT+P | L3XT+Q | (L2+L3)X1.35XT | (L1+L2)X1.35XT | | | | Service Factor for Support loads | | | | Type | 1_t_ | | P_j | Q | | | | 1200 | 0.459 | | 1122.5 | 510 | | | | Motor Capacity | | | | | | | | | | | | |
| | | | | | | | | | | | | | CT12_j H<4000mm | | H<5200mm | H<6200mm | | | | Motor Capaclty(kW) | 7.5 9.5 11 | | | | | | | | | | | | | | | | | | | | SET12 | H<4000mm | H<6000mm | | | | Motor Capaclty(kW) | 8 | | | | | | | | | |
| | | |
| | | Electric Data | | |
| | | |
| | | | | | | | | | | | | | Model | Normal Width | Rise H(mm) | | | | SCT | 1000 | H < 3500 | H < 5400 | H < 7000 | - | | | | /SET | 1200 | H < 2850 | H < 4400 | H < 6250 | H < 7000 | | | | Motor (kw) | 5.5 | 8 | 11 | 13 | | | | Power Source Lead In Wire (mm2) | 4 | 5.5 | 8 | 14 | | | | MCCB Capacity Of Building (A) | 25 | 30 | 50 | 50 | | | | | | | | | | | | | |
| | | |
| | | | | SIGMA Escalator 19 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |