| | | Triangulation on polyline: Starting from a 3D closed polyline, the tool can build the triangle model using the polyline Vertexes; How to erase points and triangles automatically: Given a closed polyline, Incas allows to erase automatically the triangles and the points inside or outside the polyline. | | |
| | | S i ■■xrd.Soft Topko ©©^)®©#©(g) Topographic profiles Topko L is a supplementary module of Topko M allowing the complete management of topographic profiles. By this module it is possible to insert one or more profiles from a planimetric point of view and then insert, automatically or manually, the sections along the axis defined. The longitudinal profile can then be calculated and the final drawing performed, complete with customizable annotation. Profile data (station and elevation) can also be inserted by the user. | | |
| | | Topko L extends Topko M functions, allowing to manage topographic profiles. The profile can be inserted from the planimetry graphic window as a polyline made up of different segments; different topographic profiles can be inserted in a single project. On the topographic profile it is possible to position cross sections either manually or automatically with a fixed step. On the profile graphic window the profile can be displayed from a longitudinal point of view; the terrain profile can be calculated from the triangle digital model or directly from the survey points. However, profile data (station, terrain elevation, project elevation, description) can be inserted and modified by a table. Besides the main profile, the tool can manage up to four supplementary profiles, each one made up of a set of stakings with their own station and elevation. Profile annotations are completely customizable and allow to insert all kinds of dimensioning necessary: elevations, stations, partials, slopes, elevation difference, hectometric, etc. | | |